GeForce Sensors issue

[AIDAN108108]

Hello,

My Hacintosh has been working perfectly for the last year or so.
Today I added another screen (2 x screens now).
Changed to a multi screen setting in settings / displays.
PLugged HDMI cable in (orignal screen is using the mac display port out of the GE FORCE 970 card I am using.
All was fine, two screens working just fine etc.

When I shut my machine down and came back to it later, it wouldn't boot.
I booted up in verbose mode and it's seemingly an error with the graphocs card - related, I suspect to my installing the new

fortunately I have an older clon so I was able to get on here and post.

Can anyone tell me what I need to do. It's been a while since I ahve beenmessing aorund with bootloaders and so on so am unsire which Kexts i need to do what with etc.

I can read and write t the SSD that is my main install if needed. So I perhaps don't need to go hrough the whole install routine again (I hope).

I am pretty sure it's related to the screen I added in some way. Corrupted a driver or I need to change a setting as it's using two screens now...

many thanks in advance!

A

 

[slim.jim]

Those errors are normal since you are using a Maxwell based card and OS X doesn't support it natively.

Make sure you have the Nvidia web drivers installed, are booting with the flag nvda_drv=1 and are NOT injecting Nvidia.

Also see if you can boot with the flag nv_disable=1