- Joined
- Jun 18, 2012
- Messages
- 24
- Motherboard
- GA-Z68XP-UD3
- CPU
- i7 3770K
- Graphics
- XFX Radeon HD 6870
- Mac
- Classic Mac
- Mobile Phone
Just finished a new build with a GA-Z68XP-UD3 and an i7 3770K, and I get to the point where I complete the install of Lion on my Drive (an Intel SSD). I used UniBeast to get Lion from the Mac USB drive onto my USB, used BridgeHelper 4.0.1 (5 didn't work for some reason), and get through the OS X Install process. I go to run MultiBeast and I'm pretty sure I'm installing the necessary things, but whenever I finish installing stuff from MultiBeast when I shut down, take out the UniBeast drive and re-boot I get an endless restart loop.
I've also tried applying BridgeHelper to my Lion drive after MultiBeast and had the same outcome.
Am I missing something in MultiBeast, or am I missing another step somewhere? My BIOS is set to AHCI and it all works great until I try to boot straight from the SSD in stead of through the USB to the Lion drive.
Here's a screenshot of the MultiBeast settings I've tried - sorry it's split in two shots, my screen isn't big enough to get it all in one.
Any help is appreciated. Thanks in advance.
Jim
I've also tried applying BridgeHelper to my Lion drive after MultiBeast and had the same outcome.
Am I missing something in MultiBeast, or am I missing another step somewhere? My BIOS is set to AHCI and it all works great until I try to boot straight from the SSD in stead of through the USB to the Lion drive.
Here's a screenshot of the MultiBeast settings I've tried - sorry it's split in two shots, my screen isn't big enough to get it all in one.
Any help is appreciated. Thanks in advance.
Jim