GA-H77N-Wifi + GTX660ti 3gb problem with video

[crashoblong]

GA-H77N-Wifi + GTX660ti 3gb problem with video - FIXED

Got Mavericks to install by using 3 bootflags:
-x
GraphicsEnabler=No
npci=0x3000

installed without problem, ran multibeast. So far the only problem I've found is I no longer have multiple monitors.
I was running 3 monitors, but now only have 1.

I have no idea where to start to fix this. any suggestions would be helpful.

GA-H77N-WIFI
i7 3770S
Gigabyte GTX660ti 3gb
Samsun 840 pro ssd bootdrive

EDIT*****

I found the problem, silly me. I'd changed the bios setting so intel graphics were enabled, disabling intel graphics and I have 3 monitors again.

 

[waspsoton]

I have the same build but had trouble with bluetooth, have u had the same problem??.

 

[crashoblong]

I'm using the wifi board that comes with it and the bluetooth is working mostly. A few times I've lost pairing with my apple bluetooth keyboard. it hasn't annoyed me enough to try to find out whats going on or try to fix it, yet.

 

[ffb1980]

Hi there, Are those the only flags you used?I am getting a kernel panic with them. I do get in Installer with (-v) -x and GraphicsEnabler=No, but then I am getting install failed code 110 after a while. No succes thus as of yet. I am on the exact same board as you, have the 3770 (no s) and am installing without graphics card.

 

[remote]

Hi to all.

I'm trying to install Mavericks on a GA-h77n WIFI over my first build that was ML 10.8.5.
but I'm stuck on Multibeast.

Firstly.

Hardware list:
CPU: Core i5-3570K
MOBO : as stated before with F2 Bios
RAM: Kingston 8Gb 1600Mhz Ddr3 Non-Ecc Cl9 Dimm
WiFi: Atheros AR9280 AR5009 AR5BHB92 Half Mini PCIe
Bluetooth : IOGEAR GBU521 Bluetooth 4.0
GPU : NONE
OS Disk : Sandisk 128 gb SSD SATA 6 GB/s
Data Disk : Seagate HD 500Gb S-ATA 2,5" 5400rpm
Internal USB3 to USB2 : USB 3.0 20pin Female to USB 2.0 9Pin Housing Male Convert
Case: Antec Isk-110-vesa.
Monitor: Acer G226HQLBBD LCD Monitor 21.5 "
Keyboard and mouse : Logitech Wireless Combo MK220


Problem.
I can normally install Mavericks, I can get into setup WITHOUT any options at boot. BUT I can't install anithing with Multibeast.
Every time, Multibeast exits with a general error, saying to see the log and I can't find the log.
I've never had a single problem with ML and the prior Multibeast editions.

I'm planning to spend my Halloween solving this problem.

I've seen that crashoblong managed to install Mavericks, even if with some problems.
I'm here to ask if gently someone could post the Multibeast options used for their attempts.
And if someone is so gentle to attach the BIOS setup cause maybe the problem is there.
BTW.
I have to say that I never, NEVER found the VT-d option on my MoBo, never, and I can't understand why.

Sorry to bother you...
And thanks for your help.

:remote

 

[remote]

Solved.

After installation with Unibeast I finished the process with -x at boot time.
Everything works, still some problems with IMessage...
And I have still to test HDMI and USB 3.

Thanks again.


remote