Contribute
Register

GA-H61M-HD2 ML install

Status
Not open for further replies.
Adrian B said:
You will have problems with this until you have a suitable GPU for graphics. The onboard Intel HD graphics for G1610 often give problems with USB working or internet and or audio.

The basics to set are:

DSDT Free
Drivers > Audio> Realtek ALCxxx > without DSDT > ALC887/888b Current v100302
Network > Realtek - Lnx2Mac's RealtekRTL81xx v0.0.90
Bootloaders > Chimera v2.2.1

The following needs to be used once you have a working GPU installed and your BIOS set to 'PEG' instead of integrated.

Customize > IGPEnabler=No


Adrian B
Click to expand...


I have installed GeForce 210 graphics card and set IGPEnabler to disabled in bios.

It now starts to boot (white screen with apple logo) then goes black.

I feel so close....

yet so far away :)

Any thoughts?
 
Adrian B said:
-x GraphicsEnabler=Yes

Be careful as these commands are case sensitive. :thumbup:


Adrian B
Click to expand...

Wow! Booted into ML faster than ever before. This is awesome!!

I cannot thank you enough. you have made my day :)

Now what do I do with MB to make this a normal operating machine?

I assume I need to set something in MB to make it function normally.
 
jonbennett said:
Wow! Booted into ML faster than ever before. This is awesome!!

I cannot thank you enough. you have made my day :)

Now what do I do with MB to make this a normal operating machine?

I assume I need to set something in MB to make it function normally.
Click to expand...


OK, this is using MultiBeast6:
http://www.tonymacx86.com/downloads.php?do=file&id=201

The basics to set are:

DSDT Free
Drivers > Audio> Realtek ALCxxx > without DSDT > ALC887/888b Current v100302
Network > Realtek - Lnx2Mac's RealtekRTL81xx v0.0.90
Bootloaders > Chimera v2.2.1
Customize > IGPEnabler=No
Customize > GraphicsEnabler=Yes


Hopefully you will now be able to boot into your installation without needing your UniBeast flash drive.

Let me know how you get on.


Adrian B
 
Macallan
GA-B75M-HD3 |  i7 3770 |  Radeon HD 5570
Adrian B said:
OK, this is using MultiBeast6:
http://www.tonymacx86.com/downloads.php?do=file&id=201

The basics to set are:

DSDT Free
Drivers > Audio> Realtek ALCxxx > without DSDT > ALC887/888b Current v100302
Network > Realtek - Lnx2Mac's RealtekRTL81xx v0.0.90
Bootloaders > Chimera v2.2.1
Customize > IGPEnabler=No
Customize > GraphicsEnabler=Yes


Hopefully you will now be able to boot into your installation without needing your UniBeast flash drive.

Let me know how you get on.


Adrian B
Click to expand...

I get an Error in MB

"The Installation Failed"

Also these 2 options are not available in MB

Customize > IGPEnabler=No
Customize > GraphicsEnabler=Yes

Maybe it is b/c I had previously run MB. do I need to delete the Extra Folder then run MB again?
 
Adrian B said:
Which MultiBeast you got?

Are you using the latest version which is 6?
Click to expand...

No using 5.5.3 for ML I assumed I should not be using version 6 b/c it is not mavericks
 
jonbennett said:
No using 5.5.3 for ML I assumed I should not be using version 6 b/c it is not mavericks
Click to expand...

I tried with version 6 but I still get installation failed error
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top