- Joined
- Mar 12, 2011
- Messages
- 60
- Motherboard
- ASUS P8Z68-V
- CPU
- i7-2600K
- Graphics
- RX 570
Hello Everybody!
I started my G5 modification.
The power led and switch works.
The USB doesn't.
AsusP8Z68-V motherboard, the pin configuration of the USB header are 2=USB+5V 4=USB - 6=USB+ 8=GND 10=NC.
As I know the pin2 connects to pin9, pin4 connects to pin12, pin6 connects to pin11, pin8 connects to pin11 on the front panel, the pin10 is not necessary, but some diagram suggest to connect this to pin6 on the front panel.
I did it and the iORegistry indicates the Flash Driver,but I can not use it because there is nothing in the Finders.
I do not know what is wrong,maybe I made a mistake,or this Asus motherboard differs from Gigabyte motherboard.
Any help would be very good from an expert.
I started my G5 modification.
The power led and switch works.
The USB doesn't.
AsusP8Z68-V motherboard, the pin configuration of the USB header are 2=USB+5V 4=USB - 6=USB+ 8=GND 10=NC.
As I know the pin2 connects to pin9, pin4 connects to pin12, pin6 connects to pin11, pin8 connects to pin11 on the front panel, the pin10 is not necessary, but some diagram suggest to connect this to pin6 on the front panel.
I did it and the iORegistry indicates the Flash Driver,but I can not use it because there is nothing in the Finders.
I do not know what is wrong,maybe I made a mistake,or this Asus motherboard differs from Gigabyte motherboard.
Any help would be very good from an expert.