freeze during installation

[envahisseur.delespace]

Hi,
I built a CustoMac Pro following June Guide advices.
Here is my config :

GA-Z87X-UD4H (no more UD3H left)
i5 4670K
Crucial Ballistix Tactical LP DDR3 8 Go

I did the Unibeast/Mavericks Usb stick

I changed the Bios Options (Disable VT-d)

When i boot on the Usb, in "normal" mode it freezes during the Apple Logo page
when i boot with -x -v (or with GraphicsEnabler=Yes/No) it freezes too.

I uploaded a photo of the screen at the moment when it freezes.
If anyone could help me !
thank you
ed

 

[P1LGRIM]

Hi,
I built a CustoMac Pro following June Guide advices.
Here is my config :

GA-Z87X-UD4H (no more UD3H left)
i5 4670K
Crucial Ballistix Tactical LP DDR3 8 Go

I did the Unibeast/Mavericks Usb stick

I changed the Bios Options (Disable VT-d)

When i boot on the Usb, in "normal" mode it freezes during the Apple Logo page
when i boot with -x -v (or with GraphicsEnabler=Yes/No) it freezes too.

Do you have a graphics card ?
How are you connected to your monitor ? VGA is not supported.

Please put your hardware specs in your profile - It's a requirement of the Rules and will help others to help you.


Good Luck

 

[envahisseur.delespace]

Thank you for your reponse P1LGRIM,
I've now put my hardware spc in my profile.
I don't have a graphic card.
My monitor is VGA ...
Do i need a DVI ?

ed

 

[P1LGRIM]

I don't have a graphic card.
My monitor is VGA ...
Do i need a DVI ?

Yes

Some users have reported success with a DVI - VGA adaptor.

Good Luck

 

[envahisseur.delespace]

Wooo, i didn't expect that !
just to be sure : when i boot, i get to the apple logo using the vga monitor. (so it works at least for that)
is that "normal" ?
ed

 

[P1LGRIM]

just to be sure : when i boot, i get to the apple logo using the vga monitor. (so it works at least for that)
is that "normal" ?

Yes