First Time Build - Question about Dual Booting Windows

[Sharoncenter9]

Hi there.. this is my first time building a hackintosh and I was wondering if I had the right ideas in terms of picking parts from the buyer's guide.

Sort of went with the CustoMac Pro, but instead of a 1060, I went with a 1070.
https://www.amazon.com/gp/product/B012N6ESTC/?tag=tonymacx86com-20
https://www.amazon.com/gp/product/B01D4C7Z9Y/?tag=tonymacx86com-20
https://www.amazon.com/gp/product/B01AG9EZ3M/?tag=tonymacx86com-20
https://www.amazon.com/gp/product/B01MDLG51U/?tag=tonymacx86com-20
https://www.amazon.com/gp/product/B00OBRE5UE/?tag=tonymacx86com-20
https://www.amazon.com/gp/product/B01HHCA1IO/?tag=tonymacx86com-20

I already have a fully modular 850W PSU and a Mid-ATX tower case from a windows build a couple of years ago...

The question I had was around dual booting windows with it, as looking at the installation guide, AHCI mode for the SSD should be enabled in the BIOS, but I noticed that Windows has issues with that mode and will revert it back to IDE mode. The other option is that I could use the SSD from my current/old windows build and have windows on that drive, and OS X on the new one.

Any suggestions around the AHCI mode/dual SSDs, or any problems with the parts I listed above?

Thanks for your help!

 

[trs96]

You'll want to post your dual boot question here:
https://www.tonymacx86.com/forums/multi-booting.153/

If you picked all your parts from the B.G. there should be no problems.