- Joined
- Oct 17, 2011
- Messages
- 18
- Motherboard
- Gigabyte Designare X299
- CPU
- i9-9980XE
- Graphics
- AMD 9000
- Mac
- Mobile Phone
I had a friend pick me up this mATX MoBo over seas. The build was pretty straight forward. As expected, the Audio driver needed is the Voodoo VT2021 which so far has been stable. Thunderbolt is working the same as the Z77 4H TH & 5H TH where you need to have TB devices connected at boot time . Have not worried about on board video since Im using Xeon and Quadro 4000. Amazing how many features they stuffed into this little MoBo.
Here's a recap :
DSDT FRee Installation
VoodooHDA VT2021 0.2.7.2
3rd party SATA & Trim Enabler for boot SSD
hnak's AppleIntelE1000e Ethernet & Maojl's Atheros1c Ethernet (not sure why it needs both, but can't connect to server without both) - Atheros chip is on board
System Definition - iMac 12,2
Load Chimera 1.11.1
Use KextBeast to install AHCISeries7Injector.kext
Xeon 3.6
OSX 10.8.1
NVIDIA Quadro 4000
NVIDIA Tesla Board - yes, this card works and just requires 6 pin power the Cuda Driver.
USB 3.0 card with internal connector
LG Blueray Burner
Front USB 3.0 card reader
Software Raid with two 3TB Seagate drives.
Here's a recap :
DSDT FRee Installation
VoodooHDA VT2021 0.2.7.2
3rd party SATA & Trim Enabler for boot SSD
hnak's AppleIntelE1000e Ethernet & Maojl's Atheros1c Ethernet (not sure why it needs both, but can't connect to server without both) - Atheros chip is on board
System Definition - iMac 12,2
Load Chimera 1.11.1
Use KextBeast to install AHCISeries7Injector.kext
Xeon 3.6
OSX 10.8.1
NVIDIA Quadro 4000
NVIDIA Tesla Board - yes, this card works and just requires 6 pin power the Cuda Driver.
USB 3.0 card with internal connector
LG Blueray Burner
Front USB 3.0 card reader
Software Raid with two 3TB Seagate drives.