Contribute
Register

error when installing with kexts

Status
Not open for further replies.
Levyy

Levyy

Joined
Aug 29, 2018
Messages
20
Motherboard
H370 Aorus gaming 3 wifi
CPU
i7-8700k
Im using UsbInjectAll and XHCI 200 series injector when trying to fix my keyboard/mouse problems when installing, but i get the glitched out screen, with the forbidden logo and on the bottom its saying "still waiting for root device"

Do i use some arguments to counter this?
 
Levyy said:
Im using UsbInjectAll and XHCI 200 series injector when trying to fix my keyboard/mouse problems when installing, but i get the glitched out screen, with the forbidden logo and on the bottom its saying "still waiting for root device"
Click to expand...
"Still waiting for root device".
When installing this means that your USB flash drive cannot be found.
This is usually because the flash drive is in a USB3 port.
If this is the case move it to a USB2 port, if it is already in a USB2 port move it to another and try again.
Repeat until you have tried all USB ports.
Use a USB2 flash drive.
If it still doesn't work you could try another flash drive.
You might also try enabling Legacy on your USB3 ports in your BIOS settings.
If you only have USB3 ports try with your USB flash drive in a USB2 hub.
Make sure Fast Boot is not activated in your BIOS.

May require USBInjectAll.kext in /EFI/CLOVER/kexts/Other/.
May require XHCI-200-series-injector.kext in /EFI/CLOVER/kexts/Other/.
May need PMHeart’s patch for 10.13.6 to remove XHCI USB Port Limit to /Volumes/EFI/EFI/CLOVER/config.plist.
 
BreBo said:
"Still waiting for root device".
When installing this means that your USB flash drive cannot be found.
This is usually because the flash drive is in a USB3 port.
If this is the case move it to a USB2 port, if it is already in a USB2 port move it to another and try again.
Repeat until you have tried all USB ports.
Use a USB2 flash drive.
If it still doesn't work you could try another flash drive.
You might also try enabling Legacy on your USB3 ports in your BIOS settings.
If you only have USB3 ports try with your USB flash drive in a USB2 hub.
Make sure Fast Boot is not activated in your BIOS.

May require USBInjectAll.kext in /EFI/CLOVER/kexts/Other/.
May require XHCI-200-series-injector.kext in /EFI/CLOVER/kexts/Other/.
May need PMHeart’s patch for 10.13.6 to remove XHCI USB Port Limit to /Volumes/EFI/EFI/CLOVER/config.plist.
Click to expand...
I have put all the kexts, and the patch in, i can boot without usbinject all, and legacy is enabled by default, i get IOProviderClass error thing, looks like its in the config, with the xml stuff, and then the glitchy stuff with "Still waiting for root device" i tried all the ports, im really worried that this isnt going to work.
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top