Error message fresh install.

[munken]

Been following all the steps but don't seem to find anyone with similar problems with nearly the same setup

 

[P1LGRIM]

Im sorry, was just for reference.
Where should I begin my troubleshooting?

Boot in verbose mode and post a picture of the screen when it stops.

 

[munken]

Boot in verbose mode and post a picture of the screen when it stops.

I am extremely thankful for your help.

Here comes a picture from bootscreen in verbose mode

 

[P1LGRIM]

Here comes a picture from bootscreen in verbose mode

Did you install the web drivers for your graphics card ?

Installation procedure :
BIOS - Disable Integrated graphics - Set PEG as Primary
Use a digital connection - DVI or HDMI - VGA is not supported.
Boot with nv_disable=1
May need to update Clover
Install web drivers
Update web drivers to ensure that you have the correct version.
Config.plist - Do not inject Intel or Nvidia graphics and no ig-platform-id
Config.plist - Disable SIP fully - CsrActiveConfig 0x67
Edit config.plist - NvidiaWeb = true as per Link
May need to emulate native NVRAM - Problem 6
Remove nv_disable=1 from config.plist
May need to install Lilu.kext , LiluFriend and NvidiaGraphicsFixup.kext

Potential Problems :
HDMI 2.0 is not supported - Use HDMI 1.4 (or lower)
If your graphics card has more than one output of the type that you are using then try another one.
Black Screen with MacPro 6,1 or iMac 15 or iMac 17 System Definition

 

[munken]

Did you install the web drivers for your graphics card ?

Installation procedure :
BIOS - Disable Integrated graphics - Set PEG as Primary
Use a digital connection - DVI or HDMI - VGA is not supported.
Boot with nv_disable=1
May need to update Clover
Install web drivers
Update web drivers to ensure that you have the correct version.
Config.plist - Do not inject Intel or Nvidia graphics and no ig-platform-id
Config.plist - Disable SIP fully - CsrActiveConfig 0x67
Edit config.plist - NvidiaWeb = true as per Link
May need to emulate native NVRAM - Problem 6
Remove nv_disable=1 from config.plist
May need to install Lilu.kext , LiluFriend and NvidiaGraphicsFixup.kext

Potential Problems :
HDMI 2.0 is not supported - Use HDMI 1.4 (or lower)
If your graphics card has more than one output of the type that you are using then try another one.
Black Screen with MacPro 6,1 or iMac 15 or iMac 17 System Definition

Thank you once again you kind soul.

So all of this should I be able to manage from when I enter the first time when I for example install Multibeast?

Do you know how I can erase all the Startup options I created that are visible in my BIOS?

 

[P1LGRIM]

Do you know how I can erase all the Startup options I created that are visible in my BIOS?

See this thread.

 

[munken]

See this thread.

A great thank you once again.
I jumped the gun in the installation process without installing grafic drivers before reboot and now I can boot perfect without the USB.

Even using both screens.

One thing missing and that I have no Ethernet connection.
Installed the drivers from Multibeast but no luck here.

Is this a settings issue in OSX or do I need to install a new kext?

 

[P1LGRIM]

Is this a settings issue in OSX or do I need to install a new kext?

Try this manual installation procedure :

Remove any previous failed attempts from /Library/Extensions and /System/Library/Extensions.

Open Finder and browse to /Library/Preferences/SystemConfiguration/ then delete these two files :

• NetworkInterfaces.plist
• preferences.plist

Download the kext and put it on your desktop.
Download and run KextBeast selecting /Library/Extensions as the location.

In Terminal :

sudo kextcache -i /

Press return, type your password (it will not show on screen), press return again and when the command has completed restart.