Empty PCI list - System Report

[areandres]

Hi Pavo,
thanks that you watched on it.
Attached there is the IOJones save.

Greets

 

[Pavo]

Hi Pavo,
thanks that you watched on it.
Attached there is the IOJones save.
Greets

Give me a list of what devices are in what PCI-Slot.
I am assuming the Titan-X is in PCI-Slot 1, it also looks like you have some M.2 devices installed.

 

[areandres]

Give me a list of what devices are in what PCI-Slot.
I am assuming the Titan-X is in PCI-Slot 1, it also looks like you have some M.2 devices installed.

Ok here is the List

PCI-e slot 1: Titan X
PCI-e slot 2: empty
PCI-e slot 3: Titan X
PCI-e slot 4: empty
M.2: Samsung 950 EVO NVMe SSD

Total 2 NVIDIA Titan X

Greets

 

[Pavo]

Ok here is the List
PCI-e slot 1: Titan X
PCI-e slot 2: empty
PCI-e slot 3: Titan X
PCI-e slot 4: empty
M.2: Samsung 950 EVO NVMe SSD
Total 2 NVIDIA Titan X
Greets

Try this EFI, Do not add or remove or change anything please. Test it using a USB drive first. You had a few things wrong in your config, and you were using the wrong SMBIOS for a I7-6700. This should give you native CPUPM, and also rename the devices correctly with the correct properties.

 

[areandres]

Try this EFI, Do not add or remove or change anything please. Test it using a USB drive first. You had a few things wrong in your config, and you were using the wrong SMBIOS for a I7-6700. This should give you native CPUPM, and also rename the devices correctly with the correct properties.

Hi Pavo,
i copy your EFI to my USB EFI partition and start to boot.
But it hangs for ever.
Attached you can find the Terminal information.

Greets

 

[Pavo]

Hi Pavo,
i copy your EFI to my USB EFI partition and start to boot.
But it hangs for ever.
Attached you can find the Terminal information.
Greets

Ok looks like the rename devices section isn't working properly, try this config.plist. Just replace the config.plist, nothing else please.

 

[areandres]

Ok looks like the rename devices section isn't working properly, try this config.plist. Just replace the config.plist, nothing else please.

Hi Pavo,
now my system is booting again.
Attached you can find the screenshots.
In PCI is still like before.

But good news and great news. My Blender is working.
Before it was hang up all the times.
Thanks man.

 

[Pavo]

Hi Pavo,
now my system is booting again.
Attached you can find the screenshots.
In PCI is still like before.

But good news and great news. My Blender is working.
Before it was hang up all the times.
Thanks man.

Run this script and upload the output it makes on your Desktop please.

 

[areandres]

Run this script and upload the output it makes on your Desktop please.

OK here we go.
Attached the output.
Just another information when i start now FCPX the computer make direct an reboot.

Thanks

 

[Pavo]

OK here we go.
Attached the output.
Just another information when i start now FCPX the computer make direct an reboot.
Thanks

Ok try this config.plist, I forgot to rename your original _DSM methods so that it would load the SSDT _DSM methods. I can not help with applications not working properly though.