- Joined
- Mar 24, 2013
- Messages
- 1
- Motherboard
- ausus p5g41t-mlx
- CPU
- core 2 duo 2.93ghx e7500
- Graphics
- geforce 210 1 gb
- Mac
- Classic Mac
- Mobile Phone
Hello , I am Rasheed.
I have successfully installed El Capitan on my System with following Configuration.
PLEASE COPY THE DOWNLOADED MULTIBEAST TO USB ( REQUIRED FOR POST INTALLATION)
NOTE:
WHAT TO DO NOW?
FOR ETHERNET/LAN DRIVER:
-INSTALL AthereosL1CEthernet.kext (just google and download it )
- you can install it with a "kext wizard" ---(utility for installing kext) also available in internet.
I have successfully installed El Capitan on my System with following Configuration.
- ASUS P5G41T-M LX Motherboard.
- Intel Core 2 Duo 2.93 GHz e7500 Processor.
- Samsung SSD 850 VO 120 GB
- 2 GB DDR3 RAM
- LG DVD RW
- NVIDIA Ge Force 210 1024MB Graphics card.
How Did i Installed?
- Prepared Elcapitan USB as follows.
- Downloaded El Capitan from appstore on a friend's macbook.
- Downloaded Unibeast latest version from Tony Mac x86
- Also Downloaded Multibeast for Elcapitan ( for post installation from Tony Mac).
- Now make sure that elcapitan app downloaded is in the applications folder of the mac.
- plugged in a usb of 16 gb and formatted it as follows.
- opened disk utility
- created 1 partition in osx-extended (journaled)
- in options- selected guid partition scheme.
- click ok, then create it.
- opened unibeast and selected usb drive as target.
- in options, i choosed Legacy SUPPORT (since asus P5G41T-M LX Motherboard is a bios type motherboard).
- in next window, i checked "Nvidia support".
- wait for it to complete.
PLEASE COPY THE DOWNLOADED MULTIBEAST TO USB ( REQUIRED FOR POST INTALLATION)
NOW YOU HAVE EL-CAPITAN USB .
- IN BIOS, OF ASUS P5G41T-M LX Motherboard
- (PRESS DEL KEL TO ENTER BIOS OF P5G41T-M LX Motherboard )
- USE THESE SETTINGS.
- SATA CONTROLLER- ENHACED
- SATA MODE- AHCI
- IN POWER------.> ACPI SUPPORT -> ENABLED.
- BOOT FROM LAN - DISABLED
- USE THESE SETTINGS.
INSTALLATION
- PLUG USB, PRESS F8 KEY TO SHOW BOOT MENU AND CHOOSE USB DRIVE.
- NOW CHOOSE THE ELCAPITAN USB TO BOOT, NO ANY BOOT FLAGS ARE USED, JUST PRESS ENTER KEY.
- WHEN INSTALLER SCREEN IS SHOWN , FROM DISK UTILITY , CREATE GUID PARTITION SCHEME- WITH 1 PARTITION AS OS X EXTENDED(JOURNALED).
- NOW CLOSE DISK UTILITY AND CONTINOUE BY CHOOSING THE TARGET AS THE DRIVE YOU JUST CREATED.
- JUST WAIT FOR INSTALLATION TO FINISH.
NOTE:
- YOU HAVE NOW JUST INSTALLED EL CAPITAN, BUT YOU CANNOT BOOT DIRECTLY TO THE HARDISK , SINCE YOU HAVE NOT COMPLETED POST INSTALLATION.
WHAT TO DO NOW?
- JUST BOOT AGIN THE USB AND NOW CHOOSE THE DRIVE OF PC WHERE YOU JUST FINISHED INSTALLATION ( NOT THE USB INSTALLER ).
- NOW MAC WILL CONTINUE CREATING USER ACCOUNTS AND ALL.
- NOW AFTER REACHING THE DESKTOP YOU HAVE TO INSTALL THE BOOTLOADER AND ESSENTIAL KEXTS ( POST INSTALLATION WITH MULTIBEAST) WHICH IS DISCUSSED BELOW.
- COPY THE DOWNLOADED MULTIBEAST FROM USB DRIVE ( OR SOME WHERE ELSE).
- CLICK ON QUICK START---> THEN PRESS LEGACY BOOT
- CLICK BOOT LOADER--> CLOVER LEGACY BOOT MODE
- CLICK CUSTOMIZE--- > CHECK INJECT NVIDIA
- CLICK BULID--> CHOSE HARD DRIVE OF PC WHERE YOU INSTALLED EL CAPITAN
- CLICK INSTALL.
- NOW REEBOOT AFTER INTALLATION COMPLETE.
- NOW YOU CAN DIRCTLY BOOT YOUR PC WITHOUT USB.
FOR ETHERNET/LAN DRIVER:
-INSTALL AthereosL1CEthernet.kext (just google and download it )
- you can install it with a "kext wizard" ---(utility for installing kext) also available in internet.
Thank you....
Not working : only Audio--- Its alc 887 so you could patch apple hda.kext and make it working...
Good luck...
Not working : only Audio--- Its alc 887 so you could patch apple hda.kext and make it working...
Good luck...
Last edited by a moderator: