El capitan - no sound after sleep - what chipset do i have?

[15gencoupe]

hey guys, my hackintosh has been running well for a few months, and just never got around to fixing the sound...

sound works perfect after a reboot if it goes to sleep, but kinda gets annoying

how do i tell what chipset i have for audio so i can figure out what guide to use?

thanks !

 

[P1LGRIM]

how do i tell what chipset i have for audio so i can figure out what guide to use?

You could look in your manual or on the Gigabyte website but to save you the trouble it is :
Realtek ALC1150.

 

[15gencoupe]

You could look in your manual or on the Gigabyte website but to save you the trouble it is :
Realtek ALC1150.

thank you !

is it an issue if i go to system properties and look for audio devices and it has all generic listings? (nothing to mention what you said)

 

[P1LGRIM]

Take a look at this guide :
http://www.tonymacx86.com/audio/143757-audio-realtek-alc-applehda-guide.html

 

[15gencoupe]

Take a look at this guide :
http://www.tonymacx86.com/audio/143757-audio-realtek-alc-applehda-guide.html

TY - was already in there when i saw your reply

nvm


EDIT:

once i have clover configuatior open, how do i do this?

10.10 and newer/Boot flags

1. Clover/config.plist
   1. Mandatory Add: config.plist/Boot/Arguments/kext-dev-mode=1
   2. Remove: Boot/Arguments/npci=0x3000

 

[P1LGRIM]

for some reason overtime i load clover to modify the config file, it says it can't mount EFI partition...

You don't modify the config.plist with Clover - Do you mean Clover Configurator ?

why wouldn't i have an EFI partition?

You do, in Terminal type :

diskutil list

Perhaps you installed Clover in Legacy mode in which case your config.plist may be in the /EFI/CLOVER folder on your system disk.

 

[15gencoupe]

You don't modify the config.plist with Clover - Do you mean Clover Configurator ?



You do, in Terminal type :

diskutil list

Perhaps you installed Clover in Legacy mode in which case your config.plist may be in the /EFI/CLOVER folder on your system disk.

once i have clover configuatior open, how do i do this?

10.10 and newer/Boot flags

1. Clover/config.plist
   1. Mandatory Add: config.plist/Boot/Arguments/kext-dev-mode=1
   2. Remove: Boot/Arguments/npci=0x3000

 

[P1LGRIM]

once i have clover configuatior open, how do i do this?

10.10 and newer/Boot flags

1. Clover/config.plist
   1. Mandatory Add: config.plist/Boot/Arguments/kext-dev-mode=1
   2. Remove: Boot/Arguments/npci=0x3000

Is it really so complicated that you couldn't figure it out ?

.

 

[15gencoupe]

Is it really so complicated that you couldn't figure it out ?

.

thats what i had... but was afraid to save and reboot and be stuck in a boot loop...

 

[15gencoupe]

Thank you, will continue to follow the guide and see if I can get it working