Contribute
Register

Easynote TJ65 Hardware Acceleration

Status
Not open for further replies.
Ousret

Ousret

Joined
Apr 1, 2013
Messages
3
Motherboard
PC
CPU
Core2Duo
Graphics
Geforce G210M
Mac
  1. 0
Classic Mac
  1. 0
Mobile Phone
  1. 0
Hello everyone,

I could not turn the graphics acceleration on.
I could install Mountain Lion with NPCI = 0x3000 parameter.

Everything works great, except the graphics acceleration.
I'm stuck at low resolution.
My graphics card is natively supported, Nvidia Geforce G210M.
And is recognized by the system. (10.8.4)


All work perfectly under Snow Leopard, as the graphics acceleration with nvidia update by tonymacx86.
If you have an idea ...

I tried GraphicsEnabler=Yes, ML load succesfully but no desktop, no graphic, stuck in starting logs (-v ncpi=3000)

Thank.
 
,,

I've found the solution for TJ65.
If anyone wanted it, just pm me.

++
 
(SOLVED) Easynote TJ65 Hardware Acceleration

TJ65 in my way.

1- Create OSX ML USB boot with Unibeast
3- Remplace USB bootloader with Enoch bootloader. (I used enoch-rev.2254.pkg)
2- Start with " npci=0x3000 -v " don't disable Graphics.
**It's may crash first time, try again. (Frezee at D3Cold or Kernel Panic)
3- Install OS X and always use " npci=0x3000 -v "

Don't ask for explanation because i don't have any..
Enjoy ^^


I thank the creators of all softwares that allows us to install our copy of OSX on a PC.
 
hi. i also have a packard bell TJ 65. can you help with a solution?
 
zuus11 said:
hi. i also have a packard bell TJ 65. can you help with a solution?
Click to expand...

Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

Mobo: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
Mobo: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.

Note: When specifying your bootloader, if using Clover legacy, please be sure to specify "Clover legacy"). Specifying "Clover" will be assumed as "Clover UEFI"
 
  • Thank you very much for replying. Here is my hardware
  • 7yMdr.png
    Chipset (Mobile Intel PM45/GM45 Chipset) *
  • 7yMdr.png
    SATA (Intel I/O Controller Hub 9 - ICH9)
  • 7yMdr.png
    Video (NVIDIA GeForce 240M GT) **
  • Audio (Conexant Cx20561)
  • 7yMdr.png
    Ethernet (Broadcom NetLink BCM5784M)
  • WiFi (Intel WiFi Link 1000 BGN)
  • CardReader (Realtek RTS5101/RTS5111/RTS5116)
  • also some info from cpu z

  • Packard bell model SJV50MV, Chipset intel PM45, Southbridge 82801IM ICH9-M
    CPU:
    Intel mobile core 2 duo T6570
    Graphics:
    nvidia GeForce GT 240M, 1024 Mb ddr3
  • 7yMdr.png
    Touchpad (Synaptics)
  • BIOS_PackardBell_1.31_A_A
    • NVIDIA Geforce GT240M 1GB DDR3.
    • SResolution 1366 x 768 pixels (WXGA) a LED.
    • Toshiba TS-L633 DVD±RW Drive.
    • DDR2 SDRAM Standard 4GB (667MHz).
    • Conexant High Definition Audio Codec.

    What i did so far. I did a install stick with unibeast with clover legacy mode. I added a dsdt to efi/clover/acpi/patched which is from another laptop packard bell 44 but a bit the same as mine. put some kext BCM5722D,FakeSMC,VoodooBattery,VoodooHDA,VoodooPS2Controller,

    Installing went perfectly fine. no error. booting normally everything recognized except wifi card. which i ve red is not compatible.

    Problem is that after applying multibeast system not booting. gives me a sort aof a kernel panic and keeps restarting. if i put back the usb it is working again.

    please help. i also atatched the dsdt,

    sorry i m stupid but this is all i could find
 

Attachments

  • DSDT.aml
    35.2 KB · Views: 217
zuus11 said:
  • Thank you very much for replying. Here is my hardware
  • 7yMdr.png
    Chipset (Mobile Intel PM45/GM45 Chipset) *
  • 7yMdr.png
    SATA (Intel I/O Controller Hub 9 - ICH9)
  • 7yMdr.png
    Video (NVIDIA GeForce 240M GT) **
  • Audio (Conexant Cx20561)
  • 7yMdr.png
    Ethernet (Broadcom NetLink BCM5784M)
  • WiFi (Intel WiFi Link 1000 BGN)
  • CardReader (Realtek RTS5101/RTS5111/RTS5116)
  • also some info from cpu z

  • Packard bell model SJV50MV, Chipset intel PM45, Southbridge 82801IM ICH9-M
    CPU:
    Intel mobile core 2 duo T6570
    Graphics:
    nvidia GeForce GT 240M, 1024 Mb ddr3
  • 7yMdr.png
    Touchpad (Synaptics)
  • BIOS_PackardBell_1.31_A_A
    • NVIDIA Geforce GT240M 1GB DDR3.
    • SResolution 1366 x 768 pixels (WXGA) a LED.
    • Toshiba TS-L633 DVD±RW Drive.
    • DDR2 SDRAM Standard 4GB (667MHz).
    • Conexant High Definition Audio Codec.

    What i did so far. I did a install stick with unibeast with clover legacy mode. I added a dsdt to efi/clover/acpi/patched which is from another laptop packard bell 44 but a bit the same as mine. put some kext BCM5722D,FakeSMC,VoodooBattery,VoodooHDA,VoodooPS2Controller,

    Installing went perfectly fine. no error. booting normally everything recognized except wifi card. which i ve red is not compatible.

    Problem is that after applying multibeast system not booting. gives me a sort aof a kernel panic and keeps restarting. if i put back the usb it is working again.

    please help. i also atatched the dsdt,

    sorry i m stupid but this is all i could find
Click to expand...

Really old hardware. Unfortunately, I have no experience with hardware this old.
 

Mr rehabMan
would remain very thankful if you could you help me patch my dsdt. i succeeded to install. i have a cpu kernel panic because the id of the processor is not the same.
is it possible that you can help me?

thank you very much
 

Attachments

  • APIC-p.aml
    104 bytes · Views: 189
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top