- Joined
- Nov 11, 2010
- Messages
- 4
- CPU
- i7 2600K
- Graphics
- HD 6870
So here what I did:
I have 1 SSD and 1 HDD
-I installed Lion 10.7.2 on SSD using Unibeast method
-Then I used disk utility to format the HDD to MASTER BOOT RECORD and MS-FAT
-I unplug the SSD and install Windows 7 on the HDD
-After the installation is done. I plug the SSD back in and set boot priority to the SSD (which carries the Chameleon bootloader)
So here the problem: Boot to MAC OS is ok, but boot to Windows 7, it says BOOTMGR is missing, ctrl alt del to restart.
I research over tonymac + web and found no solution (I even reinstall Windows 7 with GUID partition table)
I really appreciate your solution.
Thank you very much.
I have 1 SSD and 1 HDD
-I installed Lion 10.7.2 on SSD using Unibeast method
-Then I used disk utility to format the HDD to MASTER BOOT RECORD and MS-FAT
-I unplug the SSD and install Windows 7 on the HDD
-After the installation is done. I plug the SSD back in and set boot priority to the SSD (which carries the Chameleon bootloader)
So here the problem: Boot to MAC OS is ok, but boot to Windows 7, it says BOOTMGR is missing, ctrl alt del to restart.
I research over tonymac + web and found no solution (I even reinstall Windows 7 with GUID partition table)
I really appreciate your solution.
Thank you very much.