Dual Boot Problem after copying Efi

[iSpirit81]

Please help, I installed windows on m2 disk and mac os ventura on ssd.
While I was booting via usb, it saw both windows and mac, when I copied efi to the m2 disk (not seeing ssd disk in open configurator), uefi with windows no longer shows the windows m2 disk, but only the ssd with Ventura on it.

 

[Cosmix]

Please help, I installed windows on m2 disk and mac os ventura on ssd.
While I was booting via usb, it saw both windows and mac, when I copied efi to the m2 disk (not seeing ssd disk in open configurator), uefi with windows no longer shows the windows m2 disk, but only the ssd with Ventura on it.

Hello,
In a prevoius post I advised you how to install any OS :

Can i run Sonoma

i5 12500T 2.0/4.4GHz Gigabyte B760M Gaming X 16gb kingston furry 3200 500gb kingston m2 Rx 580 xfx I have no efi for.motherboard

www.tonymacx86.com

It is strange you can not identify the EFI partition of the macOS installation disk.

As such, after installing Windows, physically remove its storage.
Then install macOS, mount its EFI partition, transfer the EFI folder to EFI partition.

Test the new installation of macOS.
After that, physically re-insert the Windows storage in the system.

Keep working ..

Cheers.

===========

UPDATE : The new version of OpenCore (0.9.9) is out. You can use it.

 

[Cosmix]

I resolve dual boot,just installed win 11 again.
MacOS Ventura dont revognise my Processor

You may try to check/enable a setting in Kernel > Quirks :

Do not forget to reset Nvram on reboot !
==========================

From the manual :

 

[esafeddie]

@iSpirit81 - Hi if you're still having a problem with Windows Disk showing, that could be a Scan Policy issue where the value in the config.plist needs the correct data.

The attached pic to this post shows exactly what that setting should be in the config.plist.
Insure this is the setting you have and that should correct the error.
Good luck.