Contribute
Register

[DOUBT] DH67CL - Intel Core i5-2500 - 10GB DDR3 - Asus nVidia GeForce GT610 - Mavericks 10.9.1

Status
Not open for further replies.
Hi @RehabMan
How to install Clover on my USB "Legacy Mode" o "UEFI Mode Boot"?
I have configured:
Code: 
[B]BOOT[/B]
[COLOR=#000000]UEFI Boot: Enable[/COLOR]

On the BIOS.
 
hasbrone said:
Hi @RehabMan
How to install Clover on my USB "Legacy Mode" o "UEFI Mode Boot"?
I have configured:
Code: 
[B]BOOT[/B]
[COLOR=#000000]UEFI Boot: Enable[/COLOR]

On the BIOS.
Click to expand...

I don't understand the question. There is a Clover guide here: http://www.tonymacx86.com/yosemite-desktop-guides/144426-how-install-os-x-yosemite-using-clover.html

Of course, you need a correct config.plist and the SSDT.aml I previously posted. Other than that, the Clover USB/installation process is fairly typical.
 
RehabMan said:
I don't understand the question. There is a Clover guide here: http://www.tonymacx86.com/yosemite-desktop-guides/144426-how-install-os-x-yosemite-using-clover.html

Of course, you need a correct config.plist and the SSDT.aml I previously posted. Other than that, the Clover USB/installation process is fairly typical.
Click to expand...
No Boot the USB.

I have configured UEFI Boot: Enabled on the BIOS from my DH67CL.
Following this guide: How to Install OS X Mavericks using Clover
I selected the configuration mode to: (UEFI Boot Mode), when installed Clover on the USB, but the USB no Boot.
 
RehabMan said:
You need a correct config.plist and the SSDT I provided...
Click to expand...
Install successfully, Yosemite with Clover.
NOTE: The problem was the name of the partition: "EFI" from the USB, it is changed to CLOVER and install.
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top