- Joined
- Jun 16, 2020
- Messages
- 11
- Motherboard
- Asrock Z490-ITX/ac
- CPU
- i5-10500
- Graphics
- RX 580
- Mac
- Mobile Phone
I have Ventura 13.3.1 running with OpenCore 0.9.2 (beta) and latest kext updates on a system with Z490 + RX580. Everything works correctly, Wake/Sleep, Wifi (with T919), Apple services, Airdrop, SideCar.
I recently jump from the RX580 to RX6800 (Sapphire). I have used the same efi only by adding agdpmod=pikera as boot args. The system boots and runs normally.
But I have found a problem. When the display turns off and wakes up, the system freezes. The same thing happens if I manually change the monitor inputs. If when it is off it goes to sleep and wake up, everything works correctly.
I have noticed and when it happens there is an error in the WindowsServer process and it seems to be associated with the card. After crash, if i wait some time, process restart and i cannot unfreeze the system
Do you know any solution or workaround? Or where could I start looking at the problem?
Thank you.
I recently jump from the RX580 to RX6800 (Sapphire). I have used the same efi only by adding agdpmod=pikera as boot args. The system boots and runs normally.
But I have found a problem. When the display turns off and wakes up, the system freezes. The same thing happens if I manually change the monitor inputs. If when it is off it goes to sleep and wake up, everything works correctly.
I have noticed and when it happens there is an error in the WindowsServer process and it seems to be associated with the card. After crash, if i wait some time, process restart and i cannot unfreeze the system
Do you know any solution or workaround? Or where could I start looking at the problem?
Thank you.