Dell Vostro 1510 Freeze on Desktop after at least 10s.

[Dr.Cnet]

Are you booting from USB? If so, why? You should install the bootloader to your HDD before doing anything else.

See guide: http://www.tonymacx86.com/yosemite-laptop-support/146870-guide-native-power-management-laptops.html

Unfortunately yes, becuase I can't boot from HDD, My CPU is not Haswell or Sandybridge or Ivy I have a Core2Dou CPU and in this tutorial you didnt mentioned about it, what can I do?

Actually I try to Install Chameleon bootloader from Multibeast but after some try, I can't boot frim hdd and finally i got some error in booting from hdd:
boot0:test
boot0:test
boot0:test
boot0:GPT
boot0:test
boot0:test
boot0:test
boot0:Error

 

[RehabMan]

Unfortunately yes, becuase I can't boot from HDD, My CPU is not Haswell or Sandybridge or Ivy I have a Core2Dou CPU and in this tutorial you didnt mentioned about it, what can I do?

Actually I try to Install Chameleon bootloader from Multibeast but after some try, I can't boot frim hdd and finally i got some error in booting from hdd:
boot0:test
boot0:test
boot0:test
boot0:GPT
boot0:test
boot0:test
boot0:test
boot0:Error

The power management guide I linked provides instructions for pre-Sandy..

Search is useful...

http://www.tonymacx86.com/25-boot0-error-official-guide.html

 

[Dr.Cnet]

The power management guide I linked provides instructions for pre-Sandy..

Search is useful...

http://www.tonymacx86.com/25-boot0-error-official-guide.html

Wow, TanQ dear.
Now I can boot from HDD.
So after a fresh install and using multibeast with user dsdt and install bootloader, I do this guide and hopefully I reach to booting from HDD.
then I restart the system and come to hackintosh without safe boot, I saw the same freezing problem still there, So I restore Vanilla kext as you mentioned, after a reboot the laptop unfortunately the same freezing problem

 

[RehabMan]

Wow, TanQ dear.
Now I can boot from HDD.
So after a fresh install and using multibeast with user dsdt and install bootloader, I do this guide and hopefully I reach to booting from HDD.
then I restart the system and come to hackintosh without safe boot, I saw the same freezing problem still there, So I restore Vanilla kext as you mentioned, after a reboot the laptop unfortunately the same freezing problem

No idea without knowing exactly what you're installing...

Did you patch DSDT?

See guide: http://www.tonymacx86.com/yosemite-laptop-support/146870-guide-native-power-management-laptops.html

 

[Dr.Cnet]

No idea without knowing exactly what you're installing...

Did you patch DSDT?

See guide: http://www.tonymacx86.com/yosemite-laptop-support/146870-guide-native-power-management-laptops.html

Hi
Look I install a Hackintosh with Unibeast, after complete the account wizard, I run the multibeast and choose the DSDT Free to install Chameleon boot loader with some Drivers and Customization when the installation complete I boot from USB and Unmount the Driver to boot from HDD.
After this change I'm here with this Freezing problem.
I try to patched DSDT with MaciASL but when I run the MaciASL I don't know how to change, compile or patched this 7000 Lines!
Can you patch my DSDT? I can provide any information you need to do this, please.

 

[RehabMan]

Hi
Look I install a Hackintosh with Unibeast, after complete the account wizard, I run the multibeast and choose the DSDT Free to install Chameleon boot loader with some Drivers and Customization when the installation complete I boot from USB and Unmount the Driver to boot from HDD.
After this change I'm here with this Freezing problem.
I try to patched DSDT with MaciASL but when I run the MaciASL I don't know how to change, compile or patched this 7000 Lines!
Can you patch my DSDT? I can provide any information you need to do this, please.

What *exactly* did you install with Multibeast?

DSDT/SSDT patching guide is here: http://www.tonymacx86.com/yosemite-laptop-support/152573-guide-patching-laptop-dsdt-ssdts.html

 

[Dr.Cnet]

What *exactly* did you install with Multibeast?

DSDT/SSDT patching guide is here: http://www.tonymacx86.com/yosemite-laptop-support/152573-guide-patching-laptop-dsdt-ssdts.html

Dear RehabMan I remove Yosemite and install a fresh one.
after installation complete I boot from USB to finish the Setup Mac wizard without any FLAG, After finishing that wizard and login to the Yosemite, I face with Freezing problem.
So I reboot the laptop and boot Yosemite frome USB again with -x Flag to install bootloader.
after reading Multibeast Features.pdf and your guides I run the Multibeast and decided to choose EasyBeast which is for core2 dou systems with no native cpu power management. ( actually I don't know my processor have native power managment or not.)
Finally I build these configuration and install them.

Quick Start> EasyBeast
Drivers> Disk> 3rd party sata
Drivers> Misc> ElliottForceLegacyRTC (did I need this?)
Drivers> Misc> EvOreboot (did I need this?)
Drivers> Misc> FakeSMC v6.14.1364
Drivers> Misc> NullCPUPowerManagement (did I need this?)
Bootloader> Chimera v4.0.1
Customize> Boot optios> Basic boot option
Customize> Boot optios> Generate CPU States
Customize> Boot optios> Hibernate Mode-Laptop
Customize> Boot optios> Kext Dev Mode (did I need this?)
Customize> Boot optios> Use kernel Cache (did I need this?)
Customize> System Definition> Mac Pro> Mac Pro 3,1
Customize> Theme> tonymacx86 black

After installation succeeded I restart the laptop from Apple logo and after that I face with boot0 errors, as you mentioned I passed this problem with terminal command: dd if=/usr/standalone...

SO After Quit from terminal and Os X installer I restart the laptop.
Boot from HDD with -v Flag. Unfortunately in the Yosemite Login Page my keyboard does not work. ( and freezing problem still is remaing.)

So I press the Restart button in Login Page to reboot the laptop but in this page (I used -v Flag) I have some Error:
Firewire GUID 0000000000000000 is invalid!
Firewire GUID 0000000000000000 is invalid!

After this problem I restart the laptop and boot from HDD with -x Flag to removed my Yosemite login password to log in without a keyboard.

After log in to the Yosemite without any Flag, I see the same Freezing problem.

Note: I Extract native ACPI files and Disassembling ACPI files to *.dsl files but from there I can't understand how can I patching them.
View attachment aml to dsl.zip

 

[RehabMan]

Dear RehabMan I remove Yosemite and install a fresh one.
after installation complete I boot from USB to finish the Setup Mac wizard without any FLAG, After finishing that wizard and login to the Yosemite, I face with Freezing problem.
So I reboot the laptop and boot Yosemite frome USB again with -x Flag to install bootloader.
after reading Multibeast Features.pdf and your guides I run the Multibeast and decided to choose EasyBeast which is for core2 dou systems with no native cpu power management. ( actually I don't know my processor have native power managment or not.)
Finally I build these configuration and install them.

Quick Start> EasyBeast
Drivers> Disk> 3rd party sata
Drivers> Misc> ElliottForceLegacyRTC (did I need this?)
Drivers> Misc> EvOreboot (did I need this?)
Drivers> Misc> FakeSMC v6.14.1364
Drivers> Misc> NullCPUPowerManagement (did I need this?)
Bootloader> Chimera v4.0.1
Customize> Boot optios> Basic boot option
Customize> Boot optios> Generate CPU States
Customize> Boot optios> Hibernate Mode-Laptop
Customize> Boot optios> Kext Dev Mode (did I need this?)
Customize> Boot optios> Use kernel Cache (did I need this?)
Customize> System Definition> Mac Pro> Mac Pro 3,1
Customize> Theme> tonymacx86 black

After installation succeeded I restart the laptop from Apple logo and after that I face with boot0 errors, as you mentioned I passed this problem with terminal command: dd if=/usr/standalone...

SO After Quit from terminal and Os X installer I restart the laptop.
Boot from HDD with -v Flag. Unfortunately in the Yosemite Login Page my keyboard does not work. ( and freezing problem still is remaing.)

So I press the Restart button in Login Page to reboot the laptop but in this page (I used -v Flag) I have some Error:
Firewire GUID 0000000000000000 is invalid!
Firewire GUID 0000000000000000 is invalid!

After this problem I restart the laptop and boot from HDD with -x Flag to removed my Yosemite login password to log in without a keyboard.

After log in to the Yosemite without any Flag, I see the same Freezing problem.

Note: I Extract native ACPI files and Disassembling ACPI files to *.dsl files but from there I can't understand how can I patching them.
View attachment 131254

Power management is covered here: http://www.tonymacx86.com/yosemite-laptop-support/146870-guide-native-power-management-laptops.html

You may also need to patch DSDT: http://www.tonymacx86.com/yosemite-laptop-support/152573-guide-patching-laptop-dsdt-ssdts.html

You need to install PS2 drivers as there is no native support for PS2.

 

[Dr.Cnet]

Power management is covered here: http://www.tonymacx86.com/yosemite-laptop-support/146870-guide-native-power-management-laptops.html

You may also need to patch DSDT: http://www.tonymacx86.com/yosemite-laptop-support/152573-guide-patching-laptop-dsdt-ssdts.html

You need to install PS2 drivers as there is no native support for PS2.

Hi dear
My keyboard works fine after installing PS2 Drivers. TanQ

As you mentioned I extract native ACPI files and disassembling them.
when I opened them in MaciASL I didn't find any errors to Fixing them. So in apply Patches I applies these patches:
#system_WAK2.txt
#system_HPET.txt
#system_IRQ.txt
#system_Shutdown2.txt

finally compile & save DSDT.aml to /extra folder.
After this I opened my Chameleon wizard to Edit org.chameleon.Boot.plist (I attached the Screenshot )


In SMBios I choose MacPro 3,1


In Power management when I want to install a Custom SSDT for my CPU with ssdtPRGen.sh I got the below error So I don't know how to install a SSDT for my CPU:

gDataPath: /Users/hmd/Library/ssdtPRGen/Data
System information: Mac OS X 10.10.2 (14C109)
Brandstring 'Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz'


Error: Unknown processor model ...
Visit http://ark.intel.com to gather the required data:
Processor Number
TDP
Low Frequency Mode (use AppleIntelInfo.kext)
Base Frequency
Max Turbo Frequency
Cores
Threads
Aborting ...
Done.

At the end I attached my /Extra folder and all AML/DSL files.

 

[RehabMan]

Hi dear
My keyboard works fine after installing PS2 Drivers. TanQ

As you mentioned I extract native ACPI files and disassembling them.
when I opened them in MaciASL I didn't find any errors to Fixing them. So in apply Patches I applies these patches:
#system_WAK2.txt
#system_HPET.txt
#system_IRQ.txt
#system_Shutdown2.txt[/B]

You probably need more patches than that. Common patches are listed in the guide.

In SMBios I choose MacPro 3,1

Not a good choice for laptop.

[/B]In Power management when I want to install a Custom SSDT for my CPU with ssdtPRGen.sh I got the below error So I don't know how to install a SSDT for my CPU:

You should read the guide carefully. There is no scripts capable of generating an SSDT for a CPU as old as yours.