Contribute
Register

Dell inspiron 7737 video hdmi output & backlight control not working - Help.

Status
Not open for further replies.
Hi Rehabman



Ok i will install it, but i'm conffused ACPIBacklight.kext is necessary to hdmi audio output?. Last question i've asked you is about no audio through hdmi

Thanks !!!

Your ioreg doesn't show an external HDMI device plugged in.

The layout-id on HDAU(12) does not match the layout-id on HDEF(3).
 
Your ioreg doesn't show an external HDMI device plugged in.

The layout-id on HDAU(12) does not match the layout-id on HDEF(3).

That's probably because i've applied DSDT Injection (Rename BOD3 to HDAU) from your patch repo through DSDT-1 and DSDT-7.

how can i change layout-id to match HDEF(3) ?

Thanks
 
Last edited:
That's probably because i've applied DSDT Injection (Rename BOD3 to HDAU) from your patch repo through DSDT-1 and DSDT-7.

how can i change layout-id to match HDEF(3) ?

Thanks

Change the layout-id inside the patch before applying it.
 
Hi !
Change the layout-id inside the patch before applying it.

Done. Working ! :thumbup:

RehabMan You're the best ! Thanks man for all your support and knowledge.

I've been searching for a solution to activate the webcam on mi laptop. Do you know if it's possible ?

View attachment 159803
 
Hi Rehabman !

After i've succesfully made my alc283's working, i've updated via app store to

System Version: OS X 10.11.2 (15C50)
Kernel Version: Darwin 15.2.0

After That my internal sound disappeared. I think i've overwritted my appleHDA. Is there any way of knowing what to make to get working again? or should i've make this ?

Then your AppleHDA is not vanilla. Restore all system kexts by running the 10.11.1 installer.

I've really appreciated if i have not to reinstall allover again.

Thanks
 
Hi Rehabman !

After i've succesfully made my alc283's working, i've updated via app store to

System Version: OS X 10.11.2 (15C50)
Kernel Version: Darwin 15.2.0

After That my internal sound disappeared. I think i've overwritted my appleHDA. Is there any way of knowing what to make to get working again? or should i've make this ?

ALC283 is the same as my Lenovo u430. You can use AppleHDA_ALC283.kext in my u430 repo...

https://github.com/RehabMan/Lenovo-U430-Touch-DSDT-Patch

Requirements:
- Clover bootloader
- config.plist must have the four AppleHDA patches from my config.plist in the repo
- AppleHDA.kext must be vanilla
- CodecCommander.kext installed to /S/L/E: https://github.com/RehabMan/EAPD-Codec-Commander
- AppleHDA_ALC283.kext installed to /S/L/E
- rebuild cache following the procedure detailed in the u430 guide: http://www.tonymacx86.com/yosemite-...ideapad-u330-u430-u530-using-clover-uefi.html
- DSDT patches "IRQ Fix" and "Audio Layout 3".

I've really appreciated if i have not to reinstall allover again.

Running the OS X installer without erasing the partition will simply refresh the system files.
 
Status
Not open for further replies.
Back
Top