Dell Inspiron 3x37 - 5x37 -7x37 Clover Install Guide

[Rakuun]

Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

System: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
Mobo: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.

As my main machine is my desktop and I have that already in my profile I'll post my laptop here and update my signature.

Machine: DELL inspiron 7537 Clover
CPU: i7 4500U HM77 chipset
Graphics: Intel 4400 with Nvidia 750m 1920x1080

 

[RehabMan]

As my main machine is my desktop and I have that already in my profile I'll post my laptop here and update my signature.

Machine: DELL inspiron 7537 Clover
CPU: i7 4500U HM77 chipset
Graphics: Intel 4400 with Nvidia 750m 1920x1080

Reply when you've fixed the things I mentioned earlier and when your signature is updated.

 

[Rakuun]

Made suggested changes. Was able to boot with newest Clover.

 

[bkchaw]

hi rehabman, can you please help me? when i close the lid the system does not goes to sleep. but Apple -> Sleep works perfectly. only after using Apple -> sleep to put the laptop to sleep and wake up, then lid close sleep works. but after a reboot, if i put the system to sleep when closing the lid without putting the system to sleep using apple -> sleep first then lid close does not put the system to sleep.

attached is my dsdt and ioreg. hope you can take a look for me. thanks


View attachment 149280
View attachment 149281

 

[RehabMan]

hi rehabman, can you please help me? when i close the lid the system does not goes to sleep. but Apple -> Sleep works perfectly. only after using Apple -> sleep to put the laptop to sleep and wake up, then lid close sleep works. but after a reboot, if i put the system to sleep when closing the lid without putting the system to sleep using apple -> sleep first then lid close does not put the system to sleep.

attached is my dsdt and ioreg. hope you can take a look for me. thanks


View attachment 149280
View attachment 149281

Check assertions with 'pmset -g assertions'.

Your attachment links are broken.

 

[bkchaw]

Check assertions with 'pmset -g assertions'.

Your attachment links are broken.

<code>Assertion status system-wide:
BackgroundTask 0
ApplePushServiceTask 0
UserIsActive 0
PreventUserIdleDisplaySleep 0
PreventSystemSleep 0
ExternalMedia 0
PreventUserIdleSystemSleep 0
NetworkClientActive 0
No kernel assertions.</code>

there is no assertions when i try the lib sleep

View attachment rehabman.zipView attachment MacBook Air.ioreg

 

[RehabMan]

<code>Assertion status system-wide:
BackgroundTask 0
ApplePushServiceTask 0
UserIsActive 0
PreventUserIdleDisplaySleep 0
PreventSystemSleep 0
ExternalMedia 0
PreventUserIdleSystemSleep 0
NetworkClientActive 0
No kernel assertions.</code>

there is no assertions when i try the lib sleep

View attachment 149283View attachment 149284

Looks fine. Keep in mind the ~20 second delay before sleep starts.

Also, sometimes you have to remove _PRW from the LID device (something about the GPE for it not working).

 

[bkchaw]

Looks fine. Keep in mind the ~20 second delay before sleep starts.

Also, sometimes you have to remove _PRW from the LID device (something about the GPE for it not working).

thanks rehab man, removing _PRW from the LID device works. but i lose the wake via lid function.

 

[RehabMan]

thanks rehab man, removing _PRW from the LID device works. but i lose the wake via lid function.

Yes.

 

[bkchaw]

NA