Dell Inspiron 3x37 - 5x37 -7x37 Clover Install Guide

[RehabMan]

hello
View attachment 138314

Please read carefully. I don't see ioreg, nor EFI/Clover folder.

 

[ratoine]

sorry I was wrong Hdd, here are the files and thank you again for the time spent

....
oops it's loading

View attachment 138321

 

[RehabMan]

sorry I was wrong Hdd, here are the files and thank you again for the time spent

No files are attached.

 

[ratoine]

sorry

View attachment Archive.zip

 

[RehabMan]

sorry

View attachment 138323

This EFI folder is not the one you're using. Please post files that relate to one another.

 

[ratoine]

but?? if it is the one that I use I gave my HDD, with which I redid the install and corrected the mistakes, finally tried to correct, and after patchmatik and ioreg
why I did so many stupid things that

 

[RehabMan]

but?? if it is the one that I use I gave my HDD, with which I redid the install and corrected the mistakes, finally tried to correct, and after patchmatik and ioreg
why I did so many stupid things that

It does not match your ioreg.

I cannot do any analysis without all files that go together.

From your bootlog (extracted from ioreg):

0:885  0:000  KextsToPatch: 12 requested
0:885  0:000  KextToPatch 0: disabled:AppleIntelFramebufferAzul (HDMI-audio, port 0105, 0x0a2e0008, 0x0a16000c, 0x0a2e000d, 0x0a26000d) Kext bin patch, data len: 12
0:885  0:000  KextToPatch 1: disabled:IOGraphicsFamily (Boot graphics glitch, 10.10.2/10.10.3) Kext bin patch, data len: 5
0:885  0:000  KextToPatch 2: disabled:AppleIntelFramebufferAzul (HDMI-audio, port 0204, 0x0a2e0008, 0x0a16000c, 0x0a2e000d, 0x0a26000d) Kext bin patch, data len: 12
0:885  0:000  KextToPatch 3: disabled:AppleIntelFramebufferAzul (HDMI-audio, port 0105(12), 0x0a260005 0x0a260006, 0x0d220003, 0x0a2e000a, 0x0a26000a) Kext bin patch, data len: 12
0:885  0:000  KextToPatch 4: disabled:AppleIntelFramebufferAzul (HDMI-audio, port 0204(12), 0x0a260005 0x0a260006) Kext bin patch, data len: 12
0:885  0:000  KextToPatch 5: AppleIntelFramebufferAzul (0x0a260006 9MB cursor bytes patch) Kext bin patch, data len: 20
0:885  0:000  KextToPatch 6: disabled:AppleIntelFrameBufferAzul (Enable internal display after sleep for 0x0a2e000a, 0x0a26000a) Kext bin patch, data len: 16
0:885  0:000  KextToPatch 7: disabled:AppleIntelFramebufferAzul (HDMI-audio, port 0204, 0x0a260005 0x0a260006) Kext bin patch, data len: 12
0:885  0:000  KextToPatch 8: disabled:AppleIntelFramebufferAzul (HDMI-audio, port 0105(12), 0x0a2e0008, 0x0a16000c, 0x0a2e000d, 0x0a26000d) Kext bin patch, data len: 12
0:885  0:000  KextToPatch 9: disabled:IOAHCIBlockStorage (Enable TRIM for SSD) Kext bin patch, data len: 11
0:885  0:000  KextToPatch 10: disabled:AppleIntelFramebufferAzul (HDMI-audio, port 0105, 0x0a260005 0x0a260006, 0x0d220003, 0x0a2e000a, 0x0a26000a) Kext bin patch, data len: 12
0:885  0:000  KextToPatch 11: disabled:AppleIntelFramebufferAzul (HDMI-audio, port 0204(12), 0x0a2e0008, 0x0a16000c, 0x0a2e000d, 0x0a26000d) Kext bin patch, data len: 12

Note the 12 entries in config.plist/KernelAndKextPatches/KextsToPatch

Screen shot from your config.plist:


Note that there is no KextsToPatch section at all.

Conclusion: The EFI folder you provided was not used to boot the system at the point of ioreg capture.

 

[ratoine]

So I go to another install, and removes EFI and I reinstalled clover?

 

[RehabMan]

So I go to another install, and removes EFI and I reinstalled clover?

You should try to provide files that represent what you're doing.

 

[dontknow79]

Hi Everybody. I followed this tutorial from step 1 to 19 it was great thank you nguyenmac and all of you!!! great clover installation metod. I´ve installed Yosemite 10.10.3

After that i needed to activate full QE/CI so, i´ve used this guide

http://www.insanelymac.com/forum/topic/304267-intel-hd4400-full-qeci-in-yosemite-1010210103/

to patch
1-AppleIntelHD5000Graphics.kext.
2-AppleIntelFramebufferAzul. kext.
3-AppleGraphicsPowerManagement. kext (AGPM).

It work great, but when i plug hdmi monitor cable systema freezes. Do you know how can i fix it?

Thanks in advance