Dell 5558 Broadwell

[RehabMan]

if you please provide me ACPI patching link so i can do that thing...

It is linked from the FAQ and from your own post #126.

and just want to know ACPI means that DSDT/SSDT patching right ???

Yes. DSDT and SSDT files contain ACPI/AML code.

 

[djwallring]

It is linked from the FAQ and from your own post #126.



Yes. DSDT and SSDT files contain ACPI/AML code.

i am downloading el capitan from app store and can i reinstall using that download file and recreate partition from begin .???
i messed up many things so

can i complete reinstall mac os and recreate all partition?

because i wanted to increase size of installed HDD partition but unable to and still facing some issue so i will reinstall mac os and do everything and ACPI patching


and what is codec commander and what it for?

 

[RehabMan]

i am downloading el capitan from app store and can i reinstall using that download file and recreate partition from begin .???
i messed up many things so

can i complete reinstall mac os and recreate all partition?

because i wanted to increase size of installed HDD partition but unable to and still facing some issue so i will reinstall mac os and do everything and ACPI patching

http://www.tonymacx86.com/el-capita...de-booting-os-x-installer-laptops-clover.html

and what is codec commander and what it for?

It is described in the CodecCommander README.

 

[djwallring]

http://www.tonymacx86.com/el-capita...de-booting-os-x-installer-laptops-clover.html



It is described in the CodecCommander README.

i understand here and extracted patchmatic
i did this completely Extracting native ACPI files

cd ~/Desktop
mkdir extract
cd extract
patchmatic -extract

I don't understand this will please tell me what is this

Extracting with Clover F4:



At the main Clover bootloader screen, you can press F4 and Clover will
dump the native ACPI files to EFI/Clover/ACPI/origin. You can then
access them after you boot OS X to disassemble them and patch. Note
that some BIOS implementations reverse the function of Fn+F4 with F4, so
when in doubt, press both Fn+F4 and F4. There is no feedback during or
after the dump, just a slight delay as the files are written. The
delay is more noticeable if they are being written to USB, as would be
the case when booting from a Clover USB.



Sometimes, Clover F4 will write duplicate SSDTs. These duplicates will
cause problems during disassembly. If you run into issues (duplicate
definitions) during disassembly, you will need to analyse all SSDTs to
eliminate the files which are duplicate. For this reason, it is
sometimes easier to extract via Linux, since I've never seen Linux show
duplicate SSDTs.

and this part is necessary to download and perform?

and please explain this??

Extracting with Linux:



In Linux, the native ACPI files are available directly from the file
system. You can find them at /sys/firmware/acpi/tables and
/sys/firmware/acpi/tables/dynamic. It is possible to copy the entire
set with a single command in Terminal.



It is not necessary to install Linux. Simply run it from USB: http://www.ubuntu.com/download/deskt...ick-on-windows.



You should copy the files to a FAT32 formatted USB. Using FAT32 avoids
permissions issues as FAT32 has no file permissions. The value of DEST
for an auto-mounted USB will depend on the version of Linux you're using
and how you booted it. You can see the mount-point by typing 'mount'
in Terminal, or hover your mouse over the volume name in the Linux file
explorer.

and this method do on Linux os or on MAC os to perform ACPI patching ????

this is my ACPI zip file please check it and what to do with it i am not getting it please explain me if you can here in simple steps please
View attachment ACPI.zip

 

[RehabMan]

i understand here and extracted patchmatic
i did this completely Extracting native ACPI files

cd ~/Desktop
mkdir extract
cd extract
patchmatic -extract

I don't understand this will please tell me what is this



and this part is necessary to download and perform?

and please explain this??




and this method do on Linux os or on MAC os to perform ACPI patching ????

this is my ACPI zip file please check it and what to do with it i am not getting it please explain me if you can here in simple steps please
View attachment 167961

Any of the methods described in the ACPI patching guide can be used to extract ACPI files.

There is nothing more to explain.

 

[djwallring]

Any of the methods described in the ACPI patching guide can be used to extract ACPI files.

There is nothing more to explain.

in that post you said that download linux and run as live os and perform this task

# substitute DEST with the mountpoint of a FAT32 formatted USB stick
sudo cp -R /sys/firmware/acpi/tables DEST

so can't you provide those files because user have to download linux and make bootable and than perform that task and its a lengthy process ???

and what to do with extracted patchmatic files that in MAC os???

and which files to use extracted patchmatic in MAC os or collected from linux OS from from above code...

please explain me this because i understand quarterly here after this i am not understanding

and if you like than please EXPLAIN me after this point Disassembling ACPI files

i understand to here Extracting with Linux: after i don't get it

really want to understand and need help

 

[RehabMan]

in that post you said that download linux and run as live os and perform this task

# substitute DEST with the mountpoint of a FAT32 formatted USB stick
sudo cp -R /sys/firmware/acpi/tables DEST

so can't you provide those files because user have to download linux and make bootable and than perform that task and its a lengthy process ???

and what to do with extracted patchmatic files that in MAC os???

and which files to use extracted patchmatic in MAC os or collected from linux OS from from above code...

please explain me this because i understand quarterly here after this i am not understanding

and if you like than please EXPLAIN me after this point Disassembling ACPI files

i understand to here Extracting with Linux: after i don't get it

really want to understand and need help

Choose one method of the three to extract native ACPI files. Since you're using Clover, F4 at Clover is the easiest.

 

[djwallring]

Choose one method of the three to extract native ACPI files. Since you're using Clover, F4 at Clover is the easiest.

press FN+F4 or just F4???
so when to press F4 key when starting mac os ???
or in EFI partition ??

i don't have select drive because i did setting in config.plist file that mac os start automatic...

and i extracted this ACPI files means DSDT and SSDT in terminal with your guide
check that please

 

[RehabMan]

press FN+F4 or just F4???

System dependent. As described the guide, press both to be sure.

so when to press F4 key when starting mac os ???

At main Clover screen.

i don't have select drive because i did setting in config.plist file that mac os start automatic...

You will not be able to press F4 at the right time with such a configuration.

and i extracted this ACPI files means DSDT and SSDT in terminal with your guide
check that please

patchmatic -extract can be used if you have "clean" ACPI configuration as result of following the guide.

http://www.tonymacx86.com/el-capita...de-booting-os-x-installer-laptops-clover.html

If you're Clover ACPI config is not "clean", use Clover F4 to be certain you have unmodified files to start with.

 

[djwallring]

System dependent. As described the guide, press both to be sure.



At main Clover screen.



You will not be able to press F4 at the right time with such a configuration.



patchmatic -extract can be used if you have "clean" ACPI configuration as result of following the guide.

http://www.tonymacx86.com/el-capita...de-booting-os-x-installer-laptops-clover.html

If you're Clover ACPI config is not "clean", use Clover F4 to be certain you have unmodified files to start with.

so 1st of all i have to reach CLOVER boot screen not to start mac os and the press F4 and FN+F4 and then start mac os and then extract -patchmatic files and then

download iasl and put it inot /usr/bin
and after apply that iasl command in terminal

after apply these commands

External(_SB_.PCI0.PEG0.PEGP.SGPO, MethodObj, 2)
External(_SB_.PCI0.LPCB.H_EC.ECWT, MethodObj, 2)
External(_SB_.PCI0.LPCB.H_EC.ECRD, MethodObj, 1)
External(_GPE.MMTB, MethodObj, 0)


iasl -da -dl -fe refs.txt *.aml

after what to do??
i got understand here

and what is filtering ACPI files , i am not getting this one?
and after where to put those files which extracted using extract -patchmatic command and did above tasks in Terminal


and you refuse to use MaciASL , just do with terminal code right for perfection ?
and what will do Filtering ACPI files and where to put those files???