Debugger not configuren hanging

[vlad2407]

Hello this is my Firts time in the forum my problem is a messaje when i try to install yosemite in my PC.
Well i have a PC with this characteristics
Procesor i7 4790
Mainboard gigabyte z97x sli
Ram 2 dimm each1 with 4gb
Hard disk Samsung 500gb
Graphic nvidia 610 2gb
The problem
When the installacion begin after to configure the disk and appear the process of installation my pc is freeze.
I try with this commands
-S
-X
-V
Graphicsenabler=yes
Graphicsenabler=no
Dd if =/usr /standalone /...
And different combinacions but appear this message "debugger not configuret. Hanging. "
Please help me....
PD my biostar configuration
Sata disk ahci
Exhi. Enable
Exhi hand off. Disable
Las wake up Disable
Vt-d. Disable
Dvtmm. Max

I wish someone to help me

 

[Jithin.C.V]

Hello this is my Firts time in the forum my problem is a messaje when i try to install yosemite in my PC.
Well i have a PC with this characteristics
Procesor i7 4790
Mainboard gigabyte z97x sli
Ram 2 dimm each1 with 4gb
Hard disk Samsung 500gb
Graphic nvidia 610 2gb
The problem
When the installacion begin after to configure the disk and appear the process of installation my pc is freeze.
I try with this commands
-S
-X
-V
Graphicsenabler=yes
Graphicsenabler=no
Dd if =/usr /standalone /...
And different combinacions but appear this message "debugger not configuret. Hanging. "
Please help me....
PD my biostar configuration
Sata disk ahci
Exhi. Enable
Exhi hand off. Disable
Las wake up Disable
Vt-d. Disable
Dvtmm. Max

I wish solemne to help me.

Recreate the bootable USB.

Then boot with flags "dart=0 GraphicsEnabler=No IGPEnabler=No -f -v -no-zp" if the booting stuck with messages on screen, then capture a clear photo of the entire frozen screen and upload here.


Notes:-
* There is no space required in between -no and -zp
* Boot flags are case sensitive.

 

[impankaj58]

This is the error

 

[O_P]

I get the same thing, no amount of boot flags has helped.

 

[Romeao]

I am Having The same problem.
Debugger not configured .... Hangling

 

[Going Bald]

In UEFI/BIOS disable the serial and parallel ports.

 

[LucasGabriel]

Hello Guys, I found the solution to the problem. Try boot flag "nv_disable=1".