- Joined
- Jul 9, 2011
- Messages
- 93
- Motherboard
- Z87X-OC
- CPU
- 4770K
- Graphics
- GTX560
- Mac
- Mobile Phone
Hi guys
last week i bought MSI Z68A GD65 B3 and 2600K and 16gb memories to install Lion
PCI subsystem setting : PCI latency Timer : 32 pci bus clocks, i have 64 to 248 options
ACPI: S3
Power Led : Blinking
Onboard lan : enable
Sata Configuration : AHCI
hot plug: enable
External Sata6gb: AHCI mode
i have 6 ports sata on this board
4 black = sata2
4 white Sata3
i tried both but always same error in pic blow
Audio:Enable
HPET : enable
Virtu Tec : Disable
Intiate Graphic Adaptor: PEG
IGD Multi monitor : Disable
All usb Enable i tried disable too
Serial com : Enable
EUP 2013 : disable (green power)all wake up are Disable
CPU config :
100 X 34
HT :enable
All cores
Speed Spectrum : disable
C1E: Enable
limit CPUID : disable
Excute Disable Bit : Disable
Power tec : Disable
boot with Iboot 3,1,1 , Iboot legancy
install SL (fresh) , updated to 10,6,8,
did everything http://tonymacx86.blogspot.com/2011/07/xmove-multibeast-install-os-x-107-lion.html in this giude
REBOOT normaly without any error
the problem started here, Apple logo keeps shining and can't even catch lion install
Boot with -v i get
i am stuck in here and can press enter or write something, i mean it's not freezed, tried change kernel same problem
i never could see the Lion install screen
BTW i installed LION on my maximus IV extreme without any problem
last week i bought MSI Z68A GD65 B3 and 2600K and 16gb memories to install Lion
PCI subsystem setting : PCI latency Timer : 32 pci bus clocks, i have 64 to 248 options
ACPI: S3
Power Led : Blinking
Onboard lan : enable
Sata Configuration : AHCI
hot plug: enable
External Sata6gb: AHCI mode
i have 6 ports sata on this board
4 black = sata2
4 white Sata3
i tried both but always same error in pic blow
Audio:Enable
HPET : enable
Virtu Tec : Disable
Intiate Graphic Adaptor: PEG
IGD Multi monitor : Disable
All usb Enable i tried disable too
Serial com : Enable
EUP 2013 : disable (green power)all wake up are Disable
CPU config :
100 X 34
HT :enable
All cores
Speed Spectrum : disable
C1E: Enable
limit CPUID : disable
Excute Disable Bit : Disable
Power tec : Disable
boot with Iboot 3,1,1 , Iboot legancy
install SL (fresh) , updated to 10,6,8,
did everything http://tonymacx86.blogspot.com/2011/07/xmove-multibeast-install-os-x-107-lion.html in this giude
REBOOT normaly without any error
the problem started here, Apple logo keeps shining and can't even catch lion install
Boot with -v i get
i am stuck in here and can press enter or write something, i mean it's not freezed, tried change kernel same problem
i never could see the Lion install screen
BTW i installed LION on my maximus IV extreme without any problem