Couldn't update Pro book 450 G2

[mo7a1995]

Remove second disk while performing the update.

Removed disk1 ( the HDD) and that didn’t solve it .

 

[RehabMan]

Removed disk1 ( the HDD) and that didn’t solve it .

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.

Note: After a failed update, you must restart the update process over from the beginning.

 

[mo7a1995]

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.

Note: After a failed update, you must restart the update process over from the beginning.

I did restart the update process every time , but with no luck .

 

[RehabMan]

I did restart the update process every time , but with no luck .

What is the output of:

diskutil list

Trying to figure out why you have so many partitions detected by Clover...

0:576  0:000  - [01]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,634344A4-5E13-4DD1-A79F-B0B67EAA214B,0x28,0x64000)
0:577  0:000          Result of bootcode detection: bootable unknown (legacy)
0:578  0:001          This is SelfVolume !!
0:578  0:000  - [02]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,E0260FEA-5952-408D-B832-55C60D8B8FC4,0x64028,0x1EC1E7E8)
0:578  0:000  - [03]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,09B9D2EE-D2A6-431A-85DC-EB09B598D3FD,0x1EC82810,0x135F20)
0:579  0:000  - [04]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(4,GPT,8C9A045E-FBAB-441B-9B78-D23D1A7A41DB,0x1EDB8730,0x12605F8)

 

[mo7a1995]

What is the output of:

diskutil list

Trying to figure out why you have so many partitions detected by Clover...

0:576  0:000  - [01]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,634344A4-5E13-4DD1-A79F-B0B67EAA214B,0x28,0x64000)
0:577  0:000          Result of bootcode detection: bootable unknown (legacy)
0:578  0:001          This is SelfVolume !!
0:578  0:000  - [02]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,E0260FEA-5952-408D-B832-55C60D8B8FC4,0x64028,0x1EC1E7E8)
0:578  0:000  - [03]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,09B9D2EE-D2A6-431A-85DC-EB09B598D3FD,0x1EC82810,0x135F20)
0:579  0:000  - [04]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(4,GPT,8C9A045E-FBAB-441B-9B78-D23D1A7A41DB,0x1EDB8730,0x12605F8)

/dev/disk0 (internal, physical):

#: TYPE NAME SIZE IDENTIFIER

0: GUID_partition_scheme *275.1 GB disk0

1: EFI EFI 209.7 MB disk0s1

2: Apple_HFS macOS 264.2 GB disk0s2

3: Apple_Boot Recovery HD 650.0 MB disk0s3

4: Apple_HFS Install macOS Mojave 9.9 GB disk0s4

 

[RehabMan]

/dev/disk0 (internal, physical):

#: TYPE NAME SIZE IDENTIFIER

0: GUID_partition_scheme *275.1 GB disk0

1: EFI EFI 209.7 MB disk0s1

2: Apple_HFS macOS 264.2 GB disk0s2

3: Apple_Boot Recovery HD 650.0 MB disk0s3

4: Apple_HFS Install macOS Mojave 9.9 GB disk0s4

Why do you have an installer partition on your SSD/HDD?

 

[mo7a1995]

Why do you have an installer partition on your SSD/HDD?

Was trying to install from it

 

[RehabMan]

Was trying to install from it

As per guide, the installer goes on a USB partition.
Please read the guide carefully:
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

 

[mo7a1995]

As per guide, the installer goes on a USB partition.
Please read the guide carefully:
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

This installer I am not using , it’s for backup purposes, I’m trying to update the os from the AppStore combo update , do you think removing the installer volume would solve the problem ?

 

[mo7a1995]

This installer I am not using , it’s for backup purposes, I’m trying to update the os from the AppStore combo update , do you think removing the installer volume would solve the problem ?

Even that I tried didn’t solve anything