Core i3 2310M Graphics problems (Intel HD3000 0x0116)

[teamkiller]

Hi guys.
First sorry for my bad english.

I Have a Medion Akoya E7220 Laptop

I have Problems with the Graphics card of my cpu

If I have the HD 3000 Activate, I get a wrong image signal
MacOS, indicates to me that the monitor resolution is 1600x900x32.
The monitor shows only a half picture and the machine slows down.

The Dev ID form My HD 3000 is 0x0116 my Cpu is a Sandy Bridge Core i3 2310M (2x 2100MHz with HT)


The Mainboard Chipset is Intel series 6/C200


the monitor Edid is



Time: 01:40:29
Date: Mittwoch, 11. Juli 2012
EDID Manager Version: 1.0.0.14
___________________________________________________________________

Block 0 (EDID Base Block), Bytes 0 - 127, 128 BYTES OF EDID CODE:

0 1 2 3 4 5 6 7 8 9
000 | 00 FF FF FF FF FF FF 00 06 AF
010 | 9E 12 00 00 00 00 01 13 01 03
020 | 80 26 15 78 0A C4 95 9E 57 53
030 | 92 26 0F 50 54 00 00 00 01 01
040 | 01 01 01 01 01 01 01 01 01 01
050 | 01 01 01 01 F8 2A 40 90 61 84
060 | 0C 30 30 20 36 00 7E D6 10 00
070 | 00 18 00 00 00 0F 00 00 00 00
080 | 00 00 00 00 00 00 00 00 00 20
090 | 00 00 00 FE 00 41 55 4F 0A 20
100 | 20 20 20 20 20 20 20 20 00 00
110 | 00 FE 00 42 31 37 33 52 57 30
120 | 31 20 56 32 20 0A 00 28

(8-9) ID Manufacture Name : AUO
(10-11) ID Product Code : 129E
(12-15) ID Serial Number : 0
(16) Week of Manufacture : 1
(17) Year of Manufacture : 2009

(18) EDID Version Number : 1
(19) EDID Revision Number: 3

(20) Video Input Definition : Digital
(21) Maximum Horizontal Image Size: 38 cm
(22) Maximum Vertical Image Size : 21 cm
(23) Display Gamma : 2,20
(24) Power Management and Supported Feature(s):
RGB Color, Non-sRGB, Preferred Timing Mode

(25-34) Color Characteristics
Red Chromaticity : Rx = 0,620 Ry = 0,336
Green Chromaticity : Gx = 0,321 Gy = 0,570
Blue Chromaticity : Bx = 0,150 By = 0,056
Default White Point: Wx = 0,313 Wy = 0,329

(35) Established Timings I (Not Used)

(36) Established Timings II (Not Used)

(37) Manufacturer's Timings (Not Used)

(38-53) Standard Timings (Not Used)

(54-71) Detailed Descriptor #1: Preferred Detailed Timing (1600x900 @ 60Hz)

Pixel Clock : 110 MHz
Horizontal Image Size : 382 mm
Vertical Image Size : 214 mm
Refresh Mode : Non-interlaced
Normal Display, No Stereo

Horizontal:
Active Time : 1600 Pixels
Blanking Time : 400 Pixels
Sync Offset : 48 Pixels
Sync Pulse Width: 32 Pixels
Border : 0 Pixels
Frequency : 55 kHz

Vertical:
Active Time : 900 Lines
Blanking Time : 12 Lines
Sync Offset : 3 Lines
Sync Pulse Width: 6 Lines
Border : 0 Lines

Digital Separate, Horizontal Polarity (-), Vertical Polarity (-)

Modeline: "1600x900" 110,000 1600 1648 1680 2000 900 903 909 912 -hsync -vsync

(72-89) Detailed Descriptor #2: Defined by Manufacturer

(90-107) Detailed Descriptor #3: ASCII String Data

ASCII String Descriptor: AUO

(108-125) Detailed Descriptor #4: ASCII String Data

ASCII String Descriptor: B173RW01 V2

(126-127) Extension Flag and Checksum

Extension Block(s) : 0
Checksum Value : 40

___________________________________________________________________

System Information Summary:

Processor : Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz
Operating System : Microsoft Windows 7 Home Premium
OS Version : 6.1.7601
Service Pack : 1.0

Video Controler:

Device ID : VideoController1
Name : Intel(R) HD Graphics Family
Adapter Compatibility: Intel Corporation
Video Processor : Intel(R) HD Graphics Family
Video RAM : 1,77 GB (1,899,558,912 Bytes)
Availability : Running or Full Power
Driver Version : 8.15.10.2509
PNP Device ID : PCI\VEN_8086&DEV_0116&SUBSYS_20801B0A&REV_09\3&11583659&0&10
Resolution : 1600x900
Max Refresh Rate : 60 Hz
Min Refresh Rate : 60 Hz
Current Refresh Rate : 60 Hz
Current Scan Mode : None-Interlaced
Status : OK


___________________________________________________________________


how can i fix the Graphics

P.s.
my Kernelflags are:GraphicsEnabler=No -f and i use the Chimera 1.10 bootloader

THX Teamkiller

 

[Genjiro]

Have the Same Problem with Asus K73SV

 

[tjluckenbach]

sounds like you need to add the Dual-link definition in your dsdt.aml

Device (VID)
{
Name (_ADR, 0x00020000)
Method (_DSM, 4, NotSerialized)
{
Store (Package (0x06)
{
"AAPL00,DualLink",
Buffer (0x04)
{
0x01, 0x00, 0x00, 0x00
},
"hda-gfx",
Buffer (0x0A)
{
"onboard-1"
},
"model",
Buffer (0x18)
{
"Intel HD Graphics 3000"
},
}, Local0)
DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
Return (Local0)
}