Coffeelake Z370 OpenCore Panic Fault CR2

[dsrtegle]

Hi,
I am reinstalling macos on my coffeelake desktop today and trying to use the OpenCore for the first time. This setup was successfully running with Clover for long time without any issue. But it cannot boot up with OpenCore USB and got kernel panic showing Fault CR2: 0xffffff80167b529e. A screenshot and EFI folder attached. Can anyone help to look and give some suggestions? Thanks!

Hardware
CPU: CoffeeLake i7-8700K
MB: ASUS Z370-E
Memory: Corsair Vengeance LPX 16GBx4
SSD: Samsung 850 EVO 1TB SATA
GPU: iGPU UHD 630

BIOS SETUP

• Fast Boot - disabled
• Secure Boot - disabled
• Intel Virtualizaiton Technology - enabled
• VT-d - enabled (DisableIoMapper set to YES)
• CSM - disabled
• Intel SGX - disabled
• CFG Lock - disabled
• Above 4G decoding - enabled
• Hyper-Threading - enabled
• OS type: Windows UEFI
• DVMT Pre-Allocated(iGPU Memory): 128MB
• SATA Mode: AHCI
• Serial port - disabled

 

[jazzyseesaw]

Try changing EnableWriteUnprotector to TRUE, I know the guide says FALSE I have nearly the same config and TRUE makes it work

 

[dsrtegle]

Try changing EnableWriteUnprotector to TRUE, I know the guide says FALSE I have nearly the same config and TRUE makes it work

It works! Thank you so much! One more questions: should I turn on RebuildAppleMemoryMap as well, or turn on only EnableWriteUnprotector? The OpenCore install guide says:

• EnableWriteUnprotector: NO
  • This quirk and RebuildAppleMemoryMap can commonly conflict, recommended to enable the latter on newer platforms and disable this entry.

while it's not clear if Z370 is counted as a "newer platform".

 

[Haider007]

Can anyone help me with this? It goes kernel panic and have similar configuration.
Intel i7-8700K
Asus Z370P
MSI RX 570 8GB