Clover won't boot (PCI Configuration begin)

[xTSx]

Hello Together
i installed Mojave on my PC with following config:

CPU: Intel i7 2600k
Gigabyte GA-H67MA-USB3-B3 (BIOS,Legacy Board)
Gigabyte GeForce GTX 770
16 GB GeIL DDR3 RAM 1333
512GB Samsung 850 Pro

System is installed and runs if I am boot Mojave over the Unibeast install Stick over USB.

Now I installed over MultiBeast following things:

MultiBeast Configuration - 2019-03-06
Quick Start > Clover Legacy Boot Mode
Drivers > Audio > AppleALC
Drivers > Misc > FakeSMC
Drivers > Misc > FakeSMC Plugins
Drivers > Misc > FakeSMC HWMonitor Application
Drivers > Misc > NullCPUPowerManagement
Drivers > Network > Realtek > RealtekRTL8111 v2.2.2
Drivers > USB > 3rd Party USB 3.0
Drivers > USB > Remove XHCI USB Port Limit
Bootloaders > Clover Legacy Boot Mode
Customize > System Definitions > iMac > iMac 14,2
Customize > SSDT Options > Sandy Bridge Core i5 / i7 Overclocked

The Problem is, that the macOS won't boot completely, what things I have to configure that my Mojave will boot?
it Stucks on (PCI Configuration begin) as shown in the attached picture.

thank you

 

[BreBo]

The Problem is, that the macOS won't boot completely, what things I have to configure that my Mojave will boot?
it Stucks on (PCI Configuration begin) as shown in the attached picture.

See Hang on [ PCI configuration begin ]

 

[aabel1975]

remove usb3 option on bios