Clover won't boot on ASUS P8P67+i72600

[alucarders]

Hi guys!

I've followed the guide and got almost everything working on my hackintosh. But I can't boot from hdd despite all chosen settings in clover (but USB stick works). I've downloaded the latest version of Clover, installed on EFI partition of my HDD, but neither UEFI nor legacy mode work. I got only blinking cursor in the top left corner on the black screen and nothing more.
Can someone help me please?

My specs: ASUS P8P67, Intel i7-2600, 8Gb RAM, ATI HD5670, 1Tb Seagate drive.

 

[lmanc]

Bump, I have the exact same issue you do and posted to this thread last year:

http://www.tonymacx86.com/yosemite-...ant-boot-hdd-after-install-only-uefi-usb.html

I can boot with clover via USB stick fine, but cannot get the motherboard to recognize and boot from the UEFI partition on my SSD or HDD. I coped the exact EFI files over from the USB stick to the SSD's EFI partition but like the OP said, all I get is the blinking "_" screen

Here are my specs:

ASUS P8P67, Intel i7-2500k, 16Gb RAM, ATI HD5850

 

[Jithin.C.V]

Try to create a manual UEFI boot entry in BIOS with path /EFI/bootx64.efi then try to boot from this entry.

Good Luck...!

 

[Clifdon]

If you wonder how you should add the uefi entry checkout this link below at section 4.1.2:
http://www.insanelymac.com/forum/to...-pro4-yosemite-with-clover-uefi-installation/

I did this the exact same way and it works like a charm on Asus (P8Z68).