- Joined
- Sep 24, 2019
- Messages
- 3
- CPU
- Intel® Core™ i5-8250U CPU @ 1.60GHz × 8
- Graphics
- Intel® UHD Graphics 620
System Specs:
First of all, thank you for reading this. This is my first Hackintosh install on a laptop so this may be just a simple error.
Please find attached my EFI folder. The problem is the following:
Booting from the installation usb worked out fine and I was able to format the disk using the osx installer and then boot into the NVMe. The installation took super long and throughout all of it weird graphical artifacts appeared, see picture 2.
Finally, throughout the following installation on the NVMe it got stuck on the last part of the installation, see last picture.
I would be super grateful for any hints. Maybe the config.plist is not specific enough?
- Lenovo V130-14IKB 81HQ00MNGE (link leads to the hardware info of my laptop)
- SAMSUNG MZVLW256HEHP-000L2 NVMe drive
- Intel® Core™ i5-8250U
- 8 GB RAM , 256 GB SSD
- Intel UHD 620 Grafik
- 2 USB 3.0 ports
- https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/
- I used the following config.plist:
- UEFI mode enabled in BIOS and all other BIOS settings also obeyed as instructed in the guide
First of all, thank you for reading this. This is my first Hackintosh install on a laptop so this may be just a simple error.
Please find attached my EFI folder. The problem is the following:
Booting from the installation usb worked out fine and I was able to format the disk using the osx installer and then boot into the NVMe. The installation took super long and throughout all of it weird graphical artifacts appeared, see picture 2.
Finally, throughout the following installation on the NVMe it got stuck on the last part of the installation, see last picture.
I would be super grateful for any hints. Maybe the config.plist is not specific enough?