Clover EFI config.plist: how to set EthernetBuiltIn=Yes ???

[Marlon]

Hi to all,
I successfully installed a Maverick 9.5 booting with clover
Hardware Intel Z68, I7 2600K, Sandy Bridge
Sound ok
TV ok
2x Nividia GTX 460 ok
Bluetooth ok
Wlan ok
Lan ok
USB2/USB3 ok
SATA ok


The system runs fast, without freezes.

Software used:
Clover 2K_R2939
Clover Configurator 4.15.0
DCPIManager 1.5

Now I need urgent help with the Clover EFI config.plist
My active Ethernetcard is EN0.

Whatever I tried, I could not set "EthernetbuiltIn = Yes"

Does anybody know how to set the Network card to EthernetbuildIn = Yes in a system booting from clover ??

Thx for reply
Marlon

 

[Going Bald]

Now I need urgent help with the Clover EFI config.plist
My active Ethernetcard is EN0.

You want your active ethrnet card to be EN0. what is problem?

 

[Marlon]

Hi,
the problem is that as long EN0 is not recognized as "EthernetBuiltIn"
iMessages will not work.

see also "how to fix iMessage part 1 step 2" by jaymonkey somewhere else here in the forum.

regards Marlon

 

[Marlon]

Solved ,
I deactivated both onboard Etherner ports, pluggged out the PCI Dual Ethernet card, deleted Ethernet in setup plugged in the PCI Ethernet card, resetand reconfigured the Bios... and voila after reboot at least on port configured a EN0 and EthernetBuiltIn = Yes. The second is still still EthernetBuiltin=No. But one is Enough
Hackies are sometimes difficult to treat.
Marlon