Chimera won't load Windows 7 anymore

[roeriddler]

Chimera has loaded windows 7 and OSX plenty of times...

Now it doesn't load Windows 7 and i don't know why

I tried using windows 7 install disk to repair, it won't allow, it says THERE IS NO PROBLEM
I tried loading using Unibeast USB, does nothing same results

I tried reloading chimera using Multi beast, does noting, same results

I checked terminal, and the disk0s3 shows " Microsoft Basic Data " ...
Can someone help?


Rodneys-Mac-Pro:~ R_Flow_Productions$ diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *500.1 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_HFS Mavericks 250.1 GB disk0s2
3: Microsoft Basic Data 249.7 GB disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: FDisk_partition_scheme *1.0 TB disk1
1: Windows_NTFS Win 7 Data 1.0 TB disk1s1
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *1.0 TB disk2
1: EFI EFI 209.7 MB disk2s1
2: Apple_HFS Mac Data 999.9 GB disk2s2

Rodneys-Mac-Pro:~ R_Flow_Productions$
[Restored]

 

[Going Bald]

It sounds as if your PBR has become corrupted. If you remove the boot file from the root of your Mavericks partition and reboot, what happens? (you might have to do a "show all files" to see the boot file)

 

[roeriddler]

I neded up doing the whole entire install fresh,

I created 2 partitions using disk utility from the Unibeast Mavs USB.

Mavericks installs perfect.

but when I get to the Windows 7 install setip and reformat for windows, it formats then says " windows cant install to disk 0 partition 3 "

What should I do?

 

[Going Bald]

I neded up doing the whole entire install fresh,

I created 2 partitions using disk utility from the Unibeast Mavs USB.

Mavericks installs perfect.

but when I get to the Windows 7 install setip and reformat for windows, it formats then says " windows cant install to disk 0 partition 3 "

What should I do?

Did you format the Windows partition MSDOS FAT in Disk Utility?
How did you do your reformat?
See the second half of http://www.tonymacx86.com/multi-booting/96000-guide-dual-booting-mountain-lion-windows-8-a.html

 

[RehabMan]

I neded up doing the whole entire install fresh,

I created 2 partitions using disk utility from the Unibeast Mavs USB.

Mavericks installs perfect.

but when I get to the Windows 7 install setip and reformat for windows, it formats then says " windows cant install to disk 0 partition 3 "

What should I do?

Make sure you're booting the Windows installer in legacy, not UEFI mode.

 

[roeriddler]

I used the Disk utility, I selected 2 partitions

1st partition, named Mavericks - Journaled
2nd partition named WINDOWS - MS Fat

Guid in options

How do I know if im booting in Legacy mode or UEFI Mode?

I tried install again, " when i get to the install windows setup it says " Disk 0 Partition 3 is a MBR on partition table, Windows can only be installed on a GPT disks"

I Dont understand whats going on, I am following the exact same rules and instructions as when i got the multi boot working the 1st time....

 

[roeriddler]

I used the Disk utility, I selected 2 partitions

1st partition, named Mavericks - Journaled
2nd partition named WINDOWS - MS Fat

Guid in options

How do I know if im booting in Legacy mode or UEFI Mode?

I tried install again, " when i get to the install windows setup it says " Disk 0 Partition 3 is a MBR on partition table, Windows can only be installed on a GPT disks"

I Dont understand whats going on, I am following the exact same rules and instructions as when i got the multi boot working the 1st time....

 

[RehabMan]

...
How do I know if im booting in Legacy mode or UEFI Mode?

I tried install again, " when i get to the install windows setup it says " Disk 0 Partition 3 is a MBR on partition table, Windows can only be installed on a GPT disks"
...

You are definitely booting the Windows install media in UEFI mode.

It is tied to the way you boot Windows. Each motherboard is different, but you should notice your USB device listed twice in BIOS boot selection. Once likely with UEFI somewhere and one other... Use the one that is not marked with UEFI.

 

[roeriddler]

" RehabMan .. Going Bald " dudes your a life savers.....I pressed f12 and i noticed the duplicate of my Pioneer bluray drive that i use to boot my Windows 7 disk, I choose the other one, I reformatted my Disk 0 partition 3 " windows 7{ SLICE ) " and the " Next " option became clickable....

Windows 7 is installing as I type and I know its smooth sailing from here....thank you for the Help...