Change bus speed w/ Chimera?

[billbrasky66]

I have a Lenovo C30 (1xE5-2609 v2) and I have most things working except that the CPU runs ~250MHz slower (2.25GHz instead of 2.50GHz). After digging around it looks like the multiplier is correct (x25) but the FSB speed is running at 89MHz instead of 100MHz (as reported at the top of Chimera's boot log). I used the ssdt util to create my own SSDT, but that didn't help. It looks like Clover can change the bus speed, but I can't get clover to work properly yet. Can I do something similar with Chimera?

 

[Shiitaki]

I googled clover and bus speed, and Clover can define the bus speed to the operating system, but hat's not the same as setting the speed for the motherboard. Bus speeds are set by the bios, and adjusted manually from there. I'd check there first.

 

[billbrasky66]

Interestingly enough, the latest version of Clover (v2671) fixed this issue. HW monitor now shows 2.5GHz as it should.

 

[Leoppard]

Interestingly enough, the latest version of Clover (v2671) fixed this issue. HW monitor now shows 2.5GHz as it should.

Hi men, you have file EFI ?
I have problems and i desperate, can't make mine work