- Joined
- Feb 2, 2010
- Messages
- 108
- Motherboard
- Gigabyte GA-P55M-UD2
- CPU
- i7-860
- Graphics
- RX 570
- Mac
- Mobile Phone
My Hackintosh is currently on 10.14.6 running Clover r4934 with the following hardware:
Anyway, I was unable to boot into Mojave using Clover r5114 or higher, so having wasted a day trying to undo that damage, I decided to follow the UniBeast: Install macOS Catalina on Any Supported Intel-based PC guide instead.
Using this method I no longer had a BIOS reset and I was able to get past the "Boot macOS Install from USB" portion of the upgrade, but everytime I try to finish the upgrade by selecting "Boot macOS from HDD", the Apple Logo screen flashes briefly before emitting a single beep and then restarting. Any ideas on how I can get past this and finish the upgrade?
Attached is my config.plist and efi folder. Any help would be greatly appreciated.
Thank you,
Bruno
- Gigabyte GA-P55M - UD2
- Intel Core i7 860 2.8Ghz
- Saphire Pulse Radeon RX 570
Anyway, I was unable to boot into Mojave using Clover r5114 or higher, so having wasted a day trying to undo that damage, I decided to follow the UniBeast: Install macOS Catalina on Any Supported Intel-based PC guide instead.
Using this method I no longer had a BIOS reset and I was able to get past the "Boot macOS Install from USB" portion of the upgrade, but everytime I try to finish the upgrade by selecting "Boot macOS from HDD", the Apple Logo screen flashes briefly before emitting a single beep and then restarting. Any ideas on how I can get past this and finish the upgrade?
Attached is my config.plist and efi folder. Any help would be greatly appreciated.
Thank you,
Bruno
Attachments
Last edited: