Contribute
Register

Catalina on Z390 asus gaming e rog strix

Status
Not open for further replies.
Joined
Mar 28, 2020
Messages
29
Motherboard
Gigabyte Z390 M Gaming
CPU
i5-9600K
Graphics
ZOTAC 1070 TI
Hello everyone, with the following specs, which is the best option/way installing MacOs catalina?

I9-9900K
Asus Z390 Gaming-E Rog Strix
Corsair 2x8gb 3200mhz Ram
RTX 2070 Super (I intend to use the intel graphics for MacOs)

if this is not he place for this, please excuse me.
 
There are no Mac drivers whatsoever for a RTX 2070.
 
There are no Mac drivers whatsoever for a RTX 2070.

*************
Hello everyone, with the following specs, which is the best option/way installing MacOs catalina?

I9-9900K
Asus Z390 Gaming-E Rog Strix
Corsair 2x8gb 3200mhz Ram
RTX 2070 Super (I intend to use the intel graphics for MacOs)

if this is not he place for this, please excuse me.
**************
 
*************
Hello everyone, with the following specs, which is the best option/way installing MacOs catalina?

I9-9900K
Asus Z390 Gaming-E Rog Strix
Corsair 2x8gb 3200mhz Ram
RTX 2070 Super (I intend to use the intel graphics for MacOs)

if this is not he place for this, please excuse me.
**************
then why list a graphics card if you have no intention of using it?
 
That’s irrelevant.
Please.
If you can help with the relevant question, I’ll be happy to get it
 
It is relevant as macOS will might encounter stability issues since you won't be able to install it properly.

Search for guides on how to disable your discrete GPU.

I would suggest you to use a custom made SSDT to completely power it off (and save on your electric bill) only when booting macOS (if you plan to multi-boot).
 
It is relevant as macOS will might encounter stability issues since you won't be able to install it properly.

Search for guides on how to disable your discrete GPU.

I would suggest you to use a custom made SSDT to completely power it off (and save on your electric bill) only when booting macOS (if you plan to multi-boot).
thank you for the replay, i already managed to install macos properly, now i have a strange issue, my keyboard is not responsive/doesn't work, my mouse works well (both connected on USB 2)
 
I presume that it might be working in Clover/OC.

Boot in single user mode and check if it is still working.
 
I presume that it might be working in Clover/OC.

Boot in single user mode and check if it is still working.

I’m using OC
Installed macOS using mouse only (keyboard didn’t work) now I’m stuck at entering username and password
 
Last edited:
ok, I’ve managed to get everything working properly, boots up nicely and fast. The only issue right now is , WiFi/Bluetooth (which is built in in my mobo) doesn’t work and my 144hz monitor looks like it’s on 29hz but laggy
 
Status
Not open for further replies.
Back
Top