Can't reach installer With a H370 gaming gigabyte Mobo

[mehmetx89]

recently bought i5 8400 and the brand new Gigabyte Aorus mobo H370 . I already have Sierra Hackintosh up and running I tried to directly update to high Sierra but I failed to cause of the new hardware
so now I'm trying to install a fresh high Sierra , but now I'm stuck at boot to installer I tried lots of stuff in bios and Efi folder but no luck . a photo attached with verbose mode

I hope someone can help me fix this

thank you in advanced guys

 

[jamesst20]

recently bought i5 8400 and the brand new Gigabyte Aorus mobo H370 . I already have Sierra Hackintosh up and running I tried to directly update to high Sierra but I failed to cause of the new hardware
so now I'm trying to install a fresh high Sierra , but now I'm stuck at boot to installer I tried lots of stuff in bios and Efi folder but no luck . a photo attached with verbose mode

I hope someone can help me fix this

thank you in advanced guys

Hi,

Make sure in BIOS: Peripherals → USB Configuration → XHCI Hand-off : Enabled

 

[mehmetx89]

Yes i have it enabled but still crash trying to boot

 

[jamesst20]

Yes i have it enabled but still crash trying to boot

What happens if you try the flag acpi=off.
Did you use Unibeast to setup your USB key?

 

[mehmetx89]

What happens if you try the flag acpi=off.
Did you use Unibeast to setup your USB key?

I did use the latest unibeast to setup my usb stick and i just tried acpi=off and didn’t work either , here’s my bios configurations

Thank you so much for helping man

 

[jamesst20]

I did use the latest unibeast to setup my usb stick and i just tried acpi=off and didn’t work either , here’s my bios configurations

Thank you so much for helping man

I have never seen these error, but by googling them there are many results and different thing we can try.

You have a Gigabyte H370 Gaming 3, I have a Z370 Gaming 5, and my bios look similar to yours. Maybe you can try the following steps which are for my board

1. Save & Exit → Load Optimized Defaults
2. BIOS → Fast Boot : Disabled
3. BIOS → LAN PXE Boot Option ROM : Disabled
4. BIOS → Storage Boot Option Control : UEFI
5. Peripherals → Trusted Computing → Security Device Support : Disable
6. Peripherals → Network Stack Configuration → Network Stack : Disabled
7. Peripherals → USB Configuration → Legacy USB Support : Auto
8. Peripherals → USB Configuration → XHCI Hand-off : Enabled
9. Chipset → Vt-d : Disabled
10. Chipset → Wake on LAN Enable : Disabled
11. Chipset → IOAPIC 24-119 Entries : Enabled

 

[mehmetx89]

I tried with this settings but still no luck same error same place .

 

[macpac]

I tried with this settings but still no luck same error same place .

I get the same outcome as you have shown relating to the usb.

Any pointers on how to patch the install image to use the USB fix permissions and injectAll will the stuff from rehabman or other setting flags I can try??

I knew I should have waited for the Z370 and ordered it

Cheers

 

[jamesst20]

I tried with this settings but still no luck same error same place .

I get the same outcome as you have shown relating to the usb.

Any pointers on how to patch the install image to use the USB fix permissions and injectAll will the stuff from rehabman or other setting flags I can try??

I knew I should have waited for the Z370 and ordered it

Cheers

I made a custom EFI folder with USBAllInject setup.

 

[stanleylhs]

Hi there! I have ASRock B360M Pro 4, but I have more or less the same error log with you!

Lots of ACPI errors then kernel panic!