- Joined
- Jul 16, 2012
- Messages
- 38
- Motherboard
- Lion 10.7.5
- CPU
- Intel Core i7 2600K
- Graphics
- Gigabyte GeForce GTX 560
- Mac
- Classic Mac
- Mobile Phone
the hardware to this build is as follows
Motherboard: Gigabyte GA-Z68A-D3H-B3
Ram: Corseaire 4gb
Processor: Intel Core i3-2100 3.1GHz 3 MB Cache Socket LGA1155
Graphics: no external card (using onboard video out)
i setup my bios as the guide says here
i also made sure everything else in the picture matched my bios as well
http://tonymacx86.blogspot.com/2010/04/ ... -x-on.html
i configured my sandisk 16gb with unibeast and lion.
i then boot from usb stick then start the osx installation.
when os x goes to the grey screen it always freezes with the gears spinning pictured below
i also tried to do tag "-s" and it goes back to the grey screen and eventually freezes with this logo with a circle and a line thru it
i've made sure my usb stick is connected to a 2.0 usb port and still get errors
i even tried it while connecting it to a 3.0 port, and still got nowhere.
i even tried making unibeast with an external hard drive and tried booting from it.
and i still get the same results..
any ideas??
Motherboard: Gigabyte GA-Z68A-D3H-B3
Ram: Corseaire 4gb
Processor: Intel Core i3-2100 3.1GHz 3 MB Cache Socket LGA1155
Graphics: no external card (using onboard video out)
i setup my bios as the guide says here
i also made sure everything else in the picture matched my bios as well
http://tonymacx86.blogspot.com/2010/04/ ... -x-on.html
i configured my sandisk 16gb with unibeast and lion.
i then boot from usb stick then start the osx installation.
when os x goes to the grey screen it always freezes with the gears spinning pictured below
i also tried to do tag "-s" and it goes back to the grey screen and eventually freezes with this logo with a circle and a line thru it
i've made sure my usb stick is connected to a 2.0 usb port and still get errors
i even tried it while connecting it to a 3.0 port, and still got nowhere.
i even tried making unibeast with an external hard drive and tried booting from it.
and i still get the same results..
any ideas??