Contribute
Register

Can't get off Clover Menu after adding in Network script for config.plist

Status
Not open for further replies.
KillaByte1110

KillaByte1110

Joined
Jul 23, 2016
Messages
10
Motherboard
Gigabyte H170N-Wifi Sierra
CPU
Intel i5-6500
Graphics
Intel HD 530
Mac
  1. iMac
  2. MacBook Air
  3. MacBook Pro
  4. Mac mini
Mobile Phone
  1. iOS
Ok, so I added a script onto the config.plist on the System EFI for the WIFI Card, it didn't look lined up but I saved it anyways, after that I went to restart and when it went to the clover menu, and I tried to select the HFS, it loads the Apple logo, but then just brings me back to the menu, can someone please find me a fix?

By the way, the code was:
Code: 
<dict>
<key>Comment</key>
<string>BCM94352HMB add 0x43b114e4</string>
 <key>Find</key>
<data>PHN0cmluZz5wY2kxNGU0LDQzYmE8L3N0cmluZz4=</data>
<key>InfoPlistPatch</key>
<true/>
<key>Name</key>
<string>AirPortBrcm4360</string>
<key>Replace</key>
<data>PHN0cmluZz5wY2kxNGU0LDQzYjE8L3N0cmluZz4=</data>
</dict>
<dict>
<key>Comment</key>
<string>10.12-BCM94352-5GHz-US-FCC-dv</string>
<key>Find</key>
<data>gflSqgAAdSk=</data>
<key>Name</key>
<string>AirPortBrcm4360</string>
<key>Replace</key>
<data>gflSqgAAZpA=</data>
</dict>
<dict>
<key>Comment</key>
<string>10.11-BCM94352-FR</string>
<key>Find</key>
<data>QYP8/3QsSA==</data>
<key>Name</key>
<string>AirPortBrcm4360</string>
<key>Replace</key>
<data>ZscGRlLrKw==</data>
</dict>
<dict>
<key>Comment</key>
<string>10.11-BCM94352-Airport-Extreme</string>
<key>Find</key>
<data>axAAAHUN</data>
<key>Name</key>
<string>AirPortBrcm4360</string>
<key>Replace</key>
<data>axAAAJCQ</data>
</dict>
<dict>
<key>Comment</key>
<string>10.11-BT4LE-Handoff-Hotspot-lisai9093</string>
<key>Find</key>
<data>SIX/dEdIiwc=</data>
<key>Name</key>
<string>IOBluetoothFamily</string>
<key>Replace</key>
<data>Qb4PAAAA60Q=</data>
</dict>
<dict>
<key>Comment</key>
<string>10.11-BCM94352-Whitelest-0x4331-iMac14,3</string>
<key>Find</key>
<data>TWFjLUM2RUZBNjM5NjJGQzZFQTA=</data>
<key>Name</key>
<string>AirPortBrcm4360</string>
<key>Replace</key>
<data>TWFjLTI3QURCQjdCNENFRThFNjE=</data>
</dict>
<dict>
<key>Comment</key>
<string>10.11-BCM94352-Whitelest-0x4353-MacBoolAir5,2</string>
<key>Find</key>
<data>TWFjLUM2RUZBNjM5NjJGQzZFQTA=</data>
<key>Name</key>
<string>AirPortBrcm4360</string>
<key>Replace</key>
<data>TWFjLTI3QURCQjdCNENFRThFNjE=</data>
</dict>
HDMI Audio fix (only if you don't have it already)
Load SSDT-HDMI-HD530.aml, SSDT-HDEF-HDAS

Thanks in advance!
 
The Pioneer 2016
GA-H170N-WIFI |  i5 6500 |  HD 530
KillaByte1110 said:
Ok, so I added a script onto the config.plist on the System EFI for the WIFI Card, it didn't look lined up but I saved it anyways, after that I went to restart and when it went to the clover menu, and I tried to select the HFS, it loads the Apple logo, but then just brings me back to the menu, can someone please find me a fix?

By the way, the code was:
Code: 
<dict>
<key>Comment</key>
<string>BCM94352HMB add 0x43b114e4</string>
 <key>Find</key>
<data>PHN0cmluZz5wY2kxNGU0LDQzYmE8L3N0cmluZz4=</data>
<key>InfoPlistPatch</key>
<true/>
<key>Name</key>
<string>AirPortBrcm4360</string>
<key>Replace</key>
<data>PHN0cmluZz5wY2kxNGU0LDQzYjE8L3N0cmluZz4=</data>
</dict>
<dict>
<key>Comment</key>
<string>10.12-BCM94352-5GHz-US-FCC-dv</string>
<key>Find</key>
<data>gflSqgAAdSk=</data>
<key>Name</key>
<string>AirPortBrcm4360</string>
<key>Replace</key>
<data>gflSqgAAZpA=</data>
</dict>
<dict>
<key>Comment</key>
<string>10.11-BCM94352-FR</string>
<key>Find</key>
<data>QYP8/3QsSA==</data>
<key>Name</key>
<string>AirPortBrcm4360</string>
<key>Replace</key>
<data>ZscGRlLrKw==</data>
</dict>
<dict>
<key>Comment</key>
<string>10.11-BCM94352-Airport-Extreme</string>
<key>Find</key>
<data>axAAAHUN</data>
<key>Name</key>
<string>AirPortBrcm4360</string>
<key>Replace</key>
<data>axAAAJCQ</data>
</dict>
<dict>
<key>Comment</key>
<string>10.11-BT4LE-Handoff-Hotspot-lisai9093</string>
<key>Find</key>
<data>SIX/dEdIiwc=</data>
<key>Name</key>
<string>IOBluetoothFamily</string>
<key>Replace</key>
<data>Qb4PAAAA60Q=</data>
</dict>
<dict>
<key>Comment</key>
<string>10.11-BCM94352-Whitelest-0x4331-iMac14,3</string>
<key>Find</key>
<data>TWFjLUM2RUZBNjM5NjJGQzZFQTA=</data>
<key>Name</key>
<string>AirPortBrcm4360</string>
<key>Replace</key>
<data>TWFjLTI3QURCQjdCNENFRThFNjE=</data>
</dict>
<dict>
<key>Comment</key>
<string>10.11-BCM94352-Whitelest-0x4353-MacBoolAir5,2</string>
<key>Find</key>
<data>TWFjLUM2RUZBNjM5NjJGQzZFQTA=</data>
<key>Name</key>
<string>AirPortBrcm4360</string>
<key>Replace</key>
<data>TWFjLTI3QURCQjdCNENFRThFNjE=</data>
</dict>
HDMI Audio fix (only if you don't have it already)
Load SSDT-HDMI-HD530.aml, SSDT-HDEF-HDAS

Thanks in advance!
Click to expand...

What WiFi hardware?
What version of macOS/OS X?
 
KillaByte1110 said:
I'm using the Broadcom BCM94352Z chip, otherwise known as the Dell DW1560, and I'm running a copy of MacOS 10.12.1
Click to expand...

WiFi requirements BCM94352Z, 10.12.x:
- FakePCIID.kext + FakePCIID_Broadcom_WiFi.kext
- the-darkvoid's 'fcvo' patch in config.plist

No other patches, ACPI changes, kext mods, or additional kexts are required.

Bluetooth is separate:
- BrcmPatchRAM2.kext + BrcmFirmwareRepo.kext
- appropriate handoff patch for 10.12
 
RehabMan said:
WiFi requirements BCM94352Z, 10.12.x:
- FakePCIID.kext + FakePCIID_Broadcom_WiFi.kext
- the-darkvoid's 'fcvo' patch in config.plist

No other patches, ACPI changes, kext mods, or additional kexts are required.

Bluetooth is separate:
- BrcmPatchRAM2.kext + BrcmFirmwareRepo.kext
- appropriate handoff patch for 10.12
Click to expand...

I have all those, but I still cant get into MacOS from Clover, like when I press enter on my any of the drives, it just brings me back to the Clover menu.
 
The Pioneer 2016
GA-H170N-WIFI |  i5 6500 |  HD 530
KillaByte1110 said:
I have all those, but I still cant get into MacOS from Clover, like when I press enter on my any of the drives, it just brings me back to the Clover menu.
Click to expand...

No idea what you mean by "my any of the drives".
If you need help with your Clover setup, attach EFI/Clover as ZIP (omit themes).
 
RehabMan said:
No idea what you mean by "my any of the drives".
If you need help with your Clover setup, attach EFI/Clover as ZIP (omit themes).
Click to expand...
By "my drives" I mean the HFS and Recovery on the clover menu, and by selecting them it just brings me back to that menu, this is before MacOS loads in
 
The Pioneer 2016
GA-H170N-WIFI |  i5 6500 |  HD 530
KillaByte1110 said:
By "my drives" I mean the HFS and Recovery on the clover menu, and by selecting them it just brings me back to that menu, this is before MacOS loads in
Click to expand...

You forgot to read my last reply....
If you need help with your Clover setup, attach EFI/Clover as ZIP (omit themes).

I'm guessing you corrupted your config.plist by making incorrect edits. You seem to imply you edited it with a text editor, which you should never do, especially if you don't know XML... and even then you need to be extremely careful not to damage the syntax.
 
RehabMan said:
You forgot to read my last reply....
If you need help with your Clover setup, attach EFI/Clover as ZIP (omit themes).

I'm guessing you corrupted your config.plist by making incorrect edits. You seem to imply you edited it with a text editor, which you should never do, especially if you don't know XML... and even then you need to be extremely careful not to damage the syntax.
Click to expand...

Being new to building Hackintosh's and Computers in general, I did make the mistake of configuring the config.plist with TextEdit, as I was unsure and still am on how I add the scripts in. I am also unsure on what you mean by your advice, being very inexperience I have near to no idea what you mean by omit themes and attaching the file as ZIP
 
The Pioneer 2016
GA-H170N-WIFI |  i5 6500 |  HD 530
KillaByte1110 said:
Being new to building Hackintosh's and Computers in general, I did make the mistake of configuring the config.plist with TextEdit, as I was unsure and still am on how I add the scripts in. I am also unsure on what you mean by your advice, being very inexperience I have near to no idea what you mean by omit themes and attaching the file as ZIP
Click to expand...

Start over. Only use a plist editor to edit your config.plist (Xcode, or PlistEdit Pro). I think you will find that you are unable to even open your current config.plist with either.

EFI/Clover is Clover setup on your EFI partition. The request was for you to send the entire folder as an attachment.
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top