Contribute
Register

Can't boot to Lion installer

Status
Not open for further replies.
zg2012

zg2012

Joined
Mar 10, 2012
Messages
2
Mac
  1. 0
Classic Mac
  1. 0
Mobile Phone
  1. 0
I can't boot to my Lion installer. I created it on USB with Unibeast and Lion 10.7.3 install app. Bootloader gives me screen with USB icon on it, but when I try to get to installer I get this:

Kext com.apple.driver.AudioAUUC - library kext com.apple.iokit.IOGraphicsFamily not found.
Can't load kext com.apple.driver.AudiAUUC - failed to resolve library dependencies.
Kext com.apple.driver.AudioAUUC failed to load (0xdc00800e).
Couldn't alloc class "AudioAUUCDriver"
0 0 AppleUSBCDC: start - initDevice failed
USBMSC Identifier (non-unique): 09021000000000000000001040 0x125f 0312a 0xa00
0 0 AppleUSBCDC: start - initDevice failed
0 0 AppleUSBCDC: start - initDevice failed
rooting via boot-uuid from /chosen: AFCEA10B-13B1-3F47-9255-5632C35F7D57
From path: "uuid", Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Got boot device = IOService:/AppleACPIPlatformExpert/PCIO@0/AppleACPIPCI/USBE@1D/AppleUSBEHCI/ADATA USB Flash Drive@1d140000/IOUSBInterface@0/IOUSBMassStorageClass/IOSCSIPeripheralDeviceNub/IOSCSIPeripheralDeviceType00/IOBlockStorag
BSD root: disk1s1, major 14, minor 4
Kernel is LP64
com.apple.launchd 1 com.apple.launchd 1 *** launchd[1] has started up. ***
com.apple.launchd 1 com.apple.launchd 1 *** Verbose boot, will log to /dev/console. ***
Creating RAM Disk for /Volumes
Initialized /dev/rdisk2 as a 512 KB HFS Plus volume
Creating RAM Disk for /var/tmp
Initialized /dev/rdisk3 as a 512 KB HFS Plus volume
Creating RAM Disk for /var/run
Initialized /dev/rdisk4 as a 512 KB HFS Plus volume
Creating RAM Disk for /System/Installation
Initialized /dev/rdisk5 as a 512 KB HFS Plus volume
Creating RAM Disk for /var/db
Initialized /dev/rdisk6 as a 512 KB HFS Plus volume
Creating RAM Disk for /var/folders
Initialized /dev/rdisk7 as a 6 MB HFS Plus volume
Creating RAM Disk for /var/root/Library
Initialized /dev/rdisk8 as a 2 MB HFS Plus volume
Creating RAM Disk for /Library/ColorSync/Profiles/Displays
Initialized /dev/rdisk9 as a 1024 KB HFS Plus volume
Creating RAM Disk for /Library/Preferences
Initialized /dev/rdisk10 as a 512 KB HFS Plus volume
Creating RAM Disk for /Library/Preferences/SystemConfiguration
Initialized /dev/rdisk11 as a 512 KB HFS Plus volume
Creating RAM Disk for /Library/Keychains
Initialized /dev/rdisk12 as a 1024 KB HFS Plus volume
using 64-bit bootcache playlist
BootCacheControl: Unable to open /var/db/BootCache.playlist: 2 No such file or directory
Bug: launchctl.c:2406 (25182):30: (dbfd = open(g_job_overrides_db_path, O_RDONLY | O_EXLOCK | O_CREAT, S_IRUSR | S_IWUSR)) != -1
Previous Stuhdown Cause: 3
ACPI_SMC_PlatformPlugin::start – waitForService(resourceMatching(AppleIntelCPUPowerManagement) timed out
** Device in slot: SLOT--1 **
DSMOS has arrived


and then it just stops. My specs are:

MB: GA-P67A-D3-B3
Graphics: XFX HD 6850 ZCFC
Proc.: Intel i5-2400
RAM: Kingmax 4 GB
HDD: Seagate Barracuda 320 GB

I flashed my BIOS to F5 version but result was the same, now is on last F6 version, result is again the same.
I tried many combination of boot flags like:
GE=Yes PCIRootUID=1 --> same error
GE=Yes PCIRootUID=0 --> artifacts
GE=Yes PCIRoot=1 --> same error
GE=Yes PCIRoot=0 --> same error
GE=Yes PCIRoot=1 ncpi=0x2000 --> same error
GE=Yes PCIRoot=1 ncpi=0x3000 --> same error
GE=Yes ncpi=0x6739 --> same error
PciRoot=0 AtiConfig=Bulrushes AtiPorts=4 npci=0x2000 --> same error
PciRoot=1 AtiConfig=Bulrushes AtiPorts=4 npci=0x2000 --> same error
....

I'm trying this for days and with no success. :banghead:
Can someone help me with this please??
 
One thing that you can try is to downgrade the boot loader on your USB installer. I used Mulitbeast 3.8.0 and ran just the bootloader 1.4.1 installer with the USB key as the target.
Then booted the key using -v npci=0x2000 arguments and went directly into the Lion installer GUI.

neil
 
I discovered that problem is my graphic card. I tried with friends Gigabyte HD 5670 and it boots to the installer and install Lion without any problems. I will sold this XFX 6850 and buy some other card.
 
jzhang18 said:
The same card here. I try to figure out why it does not work.
XFX 6850 ZNFC works OOB. 2 DVI ports work, HDMI also works
http://www.newegg.com/Product/Product.a ... 6814150505
Inserting XFX 6850 ZCFC, Nothing works, neither of 2 DVI, nor 2 mini DisplayPorts.
http://www.newegg.com/Product/Product.a ... 6814150573

The same company, what makes above 2 cards a huge difference to Apple Lion?
If someone has any suggestions, please give me a post
Really appreciated
Click to expand...

Well, both cards should work but the ZCFC should work perfectly since it has the reference design pinouts. 2DVI, 2mDP, 1HDMI

That is very strange. Did you boot with GE=YES?
 
tried almost every possible solution, none of them works for me.
finally, I find out that this card cannot be recognized by Chameleon.

These are all 6850 cards, supported by latest Chameleon, (ati.c source code)

619 { 0x6739,0xAA881002, CHIP_FAMILY_BARTS,"AMD Radeon HD 6850",kDuckweed},
620 { 0x6739,0x03B41043, CHIP_FAMILY_BARTS,"AMD Radeon HD 6850",kDuckweed},
621 { 0x6739,0x21F81458, CHIP_FAMILY_BARTS,"AMD Radeon HD 6850",kBulrushes},
622 { 0x6739,0x24411462, CHIP_FAMILY_BARTS,"AMD Radeon HD 6850",kDuckweed},
623 { 0x6739,0x31101682, CHIP_FAMILY_BARTS,"AMD Radeon HD 6850",kDuckweed},
624 { 0x6739,0x67391002, CHIP_FAMILY_BARTS,"AMD Radeon HD 6850",kDuckweed},
625 { 0x6739,0xE177174B, CHIP_FAMILY_BARTS,"AMD Radeon HD 6850",kDuckweed},

XFX 6850 ZNFC is inside :623 { 0x6739,0x31101682, ...}
XFX 6850 ZCFC is not { 0x6739,0x31171682}
 
Oh, I see, didn't you try to place the framebuffer in your boot plist?
 
Yes, I tried AtiConfig=Duckweed , Bulrushes and some other values. nothing happened.

Today I compiled Chimera 1.9.1 from source code, updated this line
{ 0x6739,0x31101682, CHIP_FAMILY_BARTS,"AMD Radeon HD 6850",kDuckweed},
to
{ 0x6739,0x31171682, CHIP_FAMILY_BARTS,"AMD Radeon HD 6850",kDuckweed},

Still no luck. compiling is good, replace boot file, it boots my 9800GT fine (Lion 10.7.3)
After replacing it by XFX 6850 ZCFC, hanging on grey Apple screen again.
 
This is XFX 6850 ZCFC Bios decoding information:

ATOM BIOS Rom:
SubsystemVendorID: 0x1682 SubsystemID: 0x3117
IOBaseAddress: 0x0000
Filename: 685XZCF4
BIOS Bootup Message:
BARTS PROH ELIPDA GDDR5 32Mx32 BIOS

PCI ID: 1002:6739
Connector at index 0
Type [@offset 44350]: DisplayPort (10)
Encoder [@offset 44354]: INTERNAL_UNIPHY2 (0x21)
i2cid [@offset 44478]: 0x90, OSX senseid: 0x1
Connector at index 1
Type [@offset 44360]: DisplayPort (10)
Encoder [@offset 44364]: INTERNAL_UNIPHY2 (0x21)
i2cid [@offset 44505]: 0x91, OSX senseid: 0x2
Connector at index 2
Type [@offset 44370]: HDMI-A (11)
Encoder [@offset 44374]: INTERNAL_UNIPHY1 (0x20)
i2cid [@offset 44532]: 0x93, OSX senseid: 0x4
Connector at index 3
Type [@offset 44380]: DVI-D (3)
Encoder [@offset 44384]: INTERNAL_UNIPHY1 (0x20)
i2cid [@offset 44559]: 0x95, OSX senseid: 0x6
Connector at index 4
Type [@offset 44390]: DVI-I (2)
Encoder [@offset 44394]: INTERNAL_UNIPHY (0x1e)
i2cid [@offset 44596]: 0x94, OSX senseid: 0x5
Connector at index 5
Type [@offset 44400]: DVI-I (2)
Encoder [@offset 44404]: INTERNAL_KLDSCP_DAC1 (0x15)
i2cid [@offset 44596]: 0x94, OSX senseid: 0x5

This is XFX 6850 ZNFC Bios decoding information:

ATOM BIOS Rom:
SubsystemVendorID: 0x1682 SubsystemID: 0x3110
IOBaseAddress: 0x0000
Filename: 685ZNF63.SB
BIOS Bootup Message:
BARTS PRO HYNIX GDDR5 32Mx32 BIOS

PCI ID: 1002:6739
Connector at index 0
Type [@offset 44250]: DisplayPort (10)
Encoder [@offset 44254]: INTERNAL_UNIPHY2 (0x21)
i2cid [@offset 44360]: 0x90, OSX senseid: 0x1
Connector at index 1
Type [@offset 44260]: HDMI-A (11)
Encoder [@offset 44264]: INTERNAL_UNIPHY2 (0x21)
i2cid [@offset 44387]: 0x93, OSX senseid: 0x4
Connector at index 2
Type [@offset 44270]: DVI-I (2)
Encoder [@offset 44274]: INTERNAL_UNIPHY (0x1e)
i2cid [@offset 44424]: 0x94, OSX senseid: 0x5
Connector at index 3
Type [@offset 44280]: DVI-I (2)
Encoder [@offset 44284]: INTERNAL_KLDSCP_DAC1 (0x15)
i2cid [@offset 44424]: 0x94, OSX senseid: 0x5
Connector at index 4
Type [@offset 44290]: DVI-D (3)
Encoder [@offset 44294]: INTERNAL_UNIPHY1 (0x20)
i2cid [@offset 44451]: 0x95, OSX senseid: 0x6

Hope someone might have some clue to make zcfc working.
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top