Can't boot post MultiBeast

[themacguy]

I have an Ivy/Sandy mismatched build which means I have to use another Mac to install OS X using UniBeast onto a hard drive. After doing this, I use MultiBeast and install "Intel Graphics patch for Mixed Configurations", and then booting the hard drive using UniBeast on my Hack, the graphics & network seem to work.

After that, I tried this MultiBeast config:
http://www.tonymacx86.com/members/themacguy/albums/sandy-pro/99442-multibeast-config.png

However, that keeps giving me this error: https://i.imgur.com/1ni4wJt.jpg.

I've tried multiple times, and I always end up with this problem.

Here's my specs:

GA-Z77X-UD5H
i5-2500K
1 TB 5400RPM drive

I've tried 10.9 and 10.9.5.

What could be the cause of this issue?

 

[themacguy]

I've tried once again using OS X 10.9.5. I installed OS X onto my drive using a SATA to USB converter, then I booted into the drive on my MacBook and installed "Graphics Patch for Mixed Configurations" using MultiBeast. Then, I can boot OS X on my Hackintosh using UniBeast. I tried installing Chimera using UniBeast, which got me the boot0 error. I followed this guide: http://www.tonymacx86.com/general-help/65706-boot0-error-official-guide.html and that error went away, but I get the FireWire error again when I try booting via Chimera.
I installed only those two things using MultiBeast, Chimera and Graphics Patch for Mixed Configurations, nothing else.
After the FireWire error, I can still boot fine using the UniBeast stick.
Any help would be greatly appreciated.

 

[themacguy]

I installed EasyBeast, and I get this now:

FireWire runtime power conservation disabled. (3)
Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>