- Joined
- Feb 12, 2015
- Messages
- 40
- Motherboard
- Gigabyte GA-Z97M-D3H
- CPU
- Intel Core i7 4790K 4GHz
- Graphics
- EVGA GTX 750 Ti
Hey,
Not been able to find a Mavericks Multibeast set up to work for me with me, I'm goin to try a Yosemite install but wanted to know if any know what my issue was with my current trying.
This is my system,
Graphics - EVGA GTX 750 Ti SuperClocked 2GB GDDR5 DVI HDMI DisplayPort PCI-E
Wifi- TP-Link TL-WDN4800 Wireless-N450 Dual Band PCIe Adapter
Power -Corsair CSM 550W Semi Modular 80+ Gold
System drive - Samsung 250GB SSD 840 EVO - SSD Only
Ram - Ballistix 240-pin DIMM DDR3-1600 CL9 (9-9-9-24) PC3-12800
CPU -Core i7 4790K 4GHz Socket 1150 8MB L3 Cache
Mother Boad - Gigabyte GA-Z97M-D3H Socket LGA 1150 VGA DVI HDMI 8 Channel Audio mATX
Storage drive - Seagate 2TB BARRACUDA 3.5" SATA-III Hard Drive - 7200RPM 64MB Cache
So I got passed the install an with boot flags nv_disable=1 -f -v, booted into Mavericks desktop with the same flag plus -x.
I tried the first multibeast two setting I read, but no luck couldn't even boot with the boot flag as before.
http://www.tonymacx86.com/mavericks-desktop-guides/140157-success-ga-z97m-d3h-4790k-r9-280x.html
http://www.tonymacx86.com/mavericks-desktop-guides/135808-success-10-9-3-gigabyte-z97-d3h-xeon-e3-1231v3-evga-gtx-770-sc.html
Here is my screen shot from those trys,
Then I tryed these two DSDT free multibeast guides an had no luck,
[Success] Gigabyte H97M-D3H, i7 4790, HD4600
Fine tuning: GA-Z97M-DH3, i7-4790K, GTX 760, 10.9.4
and this is the screen i end up with after them,
I'm at a lose cos I'v tried other combinations of settings but not joy, with or with out boot flags on they don't seem to work.
But if any knows what my issue may be please help me out.
thanks for the grate help getting me this far just need a bit more!
Not been able to find a Mavericks Multibeast set up to work for me with me, I'm goin to try a Yosemite install but wanted to know if any know what my issue was with my current trying.
This is my system,
Graphics - EVGA GTX 750 Ti SuperClocked 2GB GDDR5 DVI HDMI DisplayPort PCI-E
Wifi- TP-Link TL-WDN4800 Wireless-N450 Dual Band PCIe Adapter
Power -Corsair CSM 550W Semi Modular 80+ Gold
System drive - Samsung 250GB SSD 840 EVO - SSD Only
Ram - Ballistix 240-pin DIMM DDR3-1600 CL9 (9-9-9-24) PC3-12800
CPU -Core i7 4790K 4GHz Socket 1150 8MB L3 Cache
Mother Boad - Gigabyte GA-Z97M-D3H Socket LGA 1150 VGA DVI HDMI 8 Channel Audio mATX
Storage drive - Seagate 2TB BARRACUDA 3.5" SATA-III Hard Drive - 7200RPM 64MB Cache
So I got passed the install an with boot flags nv_disable=1 -f -v, booted into Mavericks desktop with the same flag plus -x.
I tried the first multibeast two setting I read, but no luck couldn't even boot with the boot flag as before.
http://www.tonymacx86.com/mavericks-desktop-guides/140157-success-ga-z97m-d3h-4790k-r9-280x.html
http://www.tonymacx86.com/mavericks-desktop-guides/135808-success-10-9-3-gigabyte-z97-d3h-xeon-e3-1231v3-evga-gtx-770-sc.html
Here is my screen shot from those trys,
Then I tryed these two DSDT free multibeast guides an had no luck,
[Success] Gigabyte H97M-D3H, i7 4790, HD4600
Fine tuning: GA-Z97M-DH3, i7-4790K, GTX 760, 10.9.4
and this is the screen i end up with after them,
I'm at a lose cos I'v tried other combinations of settings but not joy, with or with out boot flags on they don't seem to work.
But if any knows what my issue may be please help me out.
thanks for the grate help getting me this far just need a bit more!
Last edited by a moderator: