Cant apply Patch in MaciASL

[dustojnikhummer]

Here are all "Problem Reporting" files again. What is the problem? I used X230i battery fix+Fix Mutex with non-zero synclevel but indicator is stuck at 95% (battery charging limit from Windows) and it does not show when adapter is unplugged or plugged in. It does not update unless I log out. Also, OS does not detect battery capacity right. Real capacity is around 94Whs.

 

[RehabMan]

Here are all "Problem Reporting" files again. What is the problem? I used X230i battery fix+Fix Mutex with non-zero synclevel but indicator is stuck at 95% (battery charging limit from Windows) and it does not show when adapter is unplugged or plugged in. It does not update unless I log out. Also, OS does not detect battery capacity right. Real capacity is around 94Whs.

EFI not requested.
Please provide only EFI/Clover (without themes) as per FAQ, "Problem Reporting".

 

[dustojnikhummer]

Accidentaly packed wrong folder. Here is Clover without Themes.

 

[dustojnikhummer]

(First upload failed)

 

[RehabMan]

Here are all "Problem Reporting" files again. What is the problem? I used X230i battery fix+Fix Mutex with non-zero synclevel but indicator is stuck at 95% (battery charging limit from Windows) and it does not show when adapter is unplugged or plugged in. It does not update unless I log out. Also, OS does not detect battery capacity right. Real capacity is around 94Whs.

(First upload failed)

Your ioreg shows battery is not charging and at 95%. It is quite typical. Usually, battery must be below approx 92% before the system will begin charging again (it reduces cycles on the battery).

ACPI is not patched correctly. No sign of any "OS Check Fix" being applied, for example.
See guide:
https://www.tonymacx86.com/threads/guide-patching-laptop-dsdt-ssdts.152573/

No kextcache output provided.

ACPI is reporting design capacity and max capacity of your battery at 0x20d0 (8400) mAh.
If your ACPI reports in watts, there are calculations involved (using design voltage). You can see the inputs and result of those calculations with the debug ACPIBatteryManager.kext.

 

[dustojnikhummer]

I really appriciate your help. Battery now works. It still reports wrong capacity in system info but Activity Monitor /Task Manager says about 5 hours remaining (6:30 on Windows in power saver so pretty good). I also thought that battery indicator wont switch between AC and battery but it takes about 20 seconds (is this normal?). Again,thank you. I will get to backlight and audio tommoow.

 

[RehabMan]

It still reports wrong capacity in system info

In what way is it wrong?

I also thought that battery indicator wont switch between AC and battery but it takes about 20 seconds (is this normal?).

Quick detect depends on properly implemented ACPI "AC" adapter object, EC query notifications working correctly, and updated battery status relatively quickly after those notificaitons in _BST.

 

[dustojnikhummer]

It still reports capacity wrong as in screenshot in one of my previous replies. But since inductor itself and time remaining are correct I'm not going to bother anymore with battery.

 

[RehabMan]

It still reports capacity wrong as in screenshot

How are you determining what is right and what is wrong?