Can not run in installation gui

[CWen]

My hardware: HP EliteBook 8770w, Corei7 Ivy i7-3820QM, 16GB RAM, 256SSD, AMD M4000 GPU.

I just need to install mojave, after the installation is complete, try to fix other drivers.

Tried a lot of methods but I can't do anything about it.

Appreciate any advice the good folks on the forum might be able to give me. Thanks much.

 

[Feartech]

My hardware: HP EliteBook 8770w, Corei7 Ivy i7-3820QM, 16GB RAM, 256SSD, AMD M4000 GPU.

I just need to install mojave, after the installation is complete, try to fix other drivers.

Tried a lot of methods but I can't do anything about it.

Appreciate any advice the good folks on the forum might be able to give me. Thanks much.

your laptop has a guide:
https://www.tonymacx86.com/threads/...book-zbook-using-clover-uefi-hotpatch.261719/

 

[CWen]

your laptop has a guide:
https://www.tonymacx86.com/threads/...book-zbook-using-clover-uefi-hotpatch.261719/

Thanks for your reply.
Guide included 8x60w and 8x70p, but my device is 8770w.
It does not work.
And I have 2570p and 820g3 work perfect.

 

[Feartech]

Thanks for your reply.
Guide included 8x60w and 8x70p, but my device is 8770w.
It does not work.
And I have 2570p and 820g3 work perfect.

looking at your files, you should follow the clover guide:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

 

[CWen]

looking at your files, you should follow the clover guide:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

Yes, I followed this link carefully to make a USB installer, so my 2570p and 820g3 work Mojave perfect.
But same method, no idea how to resolve the question of this thread.

 

[Feartech]

Yes, I followed this link carefully to make a USB installer, so my 2570p and 820g3 work Mojave perfect.
But same method, no idea how to resolve the question of this thread.

i suggest going back to the guide and follow as is
drivers64UEFI folder is not correct

NullCPUPowerManagement.kext is not needed

and grab a fresh config.plist from the laptop guide linked above

 

[CWen]

i suggest going back to the guide and follow as is
drivers64UEFI folder is not correct

NullCPUPowerManagement.kext is not needed

and grab a fresh config.plist from the laptop guide linked above

Thanks for your suggest.
But I have tried all the methods you said sadly.
I think I need a correct config file. No idea how can I do.

BTW
8770w does not have HD4000.

 

[Feartech]

Thanks for your suggest.
But I have tried all the methods you said sadly.
I think I need a correct config file. No idea how can I do.

you haven't followed the guide, please, re read the guide and follow as is, start from scratch, and if you have an issue, upload new files

 

[CWen]

you haven't followed the guide, please, re read the guide and follow as is, start from scratch, and if you have an issue, upload new files

8770w can not disable graphics card(AMD M4000) to use HD4000, and OS(Win or PE) can not see hd4000.
This is a root cause why I can't use the config of the guide.

 

[RehabMan]

My hardware: HP EliteBook 8770w, Corei7 Ivy i7-3820QM, 16GB RAM, 256SSD, AMD M4000 GPU.

I just need to install mojave, after the installation is complete, try to fix other drivers.

Tried a lot of methods but I can't do anything about it.

Appreciate any advice the good folks on the forum might be able to give me. Thanks much.

There is AMD related things in WhateverGreen.kext.
Suggest you do your research on AMD graphics setup in Mojave.