- Joined
- Jun 16, 2019
- Messages
- 2
- Motherboard
- MSI Z390M Gaming Edge
- CPU
- Intel Core i9 9900K
- Graphics
- AMD Vega 64
Hello, my name is Mike and i am new in the Hackintosh-scene.
This is my first Hackintosh build and i am stuck at the beginning.
I have made an Mojave Boot Stick with UniBeast (UEFI, no graphics injection because of Intel UHD). (Clover is 4920)
In the next step i have selected the SMBIOS from the iMac 19,1 (i9 9900K).
Then i have followed this instructions:
• Open USB Stick EFI Partition, navigate to EFI/CLOVER/
• Drag config.plist onto Clover Configurator app icon to open
• System Parameters → Inject Kexts : Yes
• Boot → Verbose : Enable
• Rt Variables → CsrAcrtiveConfig : 0x67
The i added this 3 kexts:
+ Lilu.kext
+ Whatevergreen.kext
+ VegaTab_64.kext => i configured it according to the instruction
Next i copied the whole EFI Folder to the Main USB Drive, so i have all twice.
After that i changed some BIOS settings:
Graphics from PEG (discrete) to IGD (integrated).
Fast Boot => deactivated
Boot Mode => UEFI
Intel Virtualization => deactivated
Intel VT-D => deactivated
CFG Lock => deactivated
BIOS Version is: E7B50IMS.140 from 26.2.2019
So after this all i inserted the USB-Stick and booted with clover from it.
Before the installtion i activated USB Ownership and USB Injection in the Clover options.
Then the installation stuck and i have this failure: AMFILoadTrustedKeysFromNVRam: no nvram variable
A photo of the failure is attached too.
I dont know what to do, to solve this.
If somebody knows how to solve this problem i would be very grateful if YOU help me.
Thanks!
Here are my components:
CPU: i9 9900K
GPU: AMD Vega 64
Mainboard: MSI Gaming Edge Z390M
RAM: HyperX 3200MHz DDR4 16GB one DIMM
Storage: Samsung NVME SSD Evo 860
The USB Stick is on a USB3.0 Port, i dont have an USB 2.0 Port.
Thanks in advance!
I can not upload my EFI folder...how can i do this?
Sorry for my bad english!
Greetings Mike.
This is my first Hackintosh build and i am stuck at the beginning.
I have made an Mojave Boot Stick with UniBeast (UEFI, no graphics injection because of Intel UHD). (Clover is 4920)
In the next step i have selected the SMBIOS from the iMac 19,1 (i9 9900K).
Then i have followed this instructions:
• Open USB Stick EFI Partition, navigate to EFI/CLOVER/
• Drag config.plist onto Clover Configurator app icon to open
• System Parameters → Inject Kexts : Yes
• Boot → Verbose : Enable
• Rt Variables → CsrAcrtiveConfig : 0x67
The i added this 3 kexts:
+ Lilu.kext
+ Whatevergreen.kext
+ VegaTab_64.kext => i configured it according to the instruction
Next i copied the whole EFI Folder to the Main USB Drive, so i have all twice.
After that i changed some BIOS settings:
Graphics from PEG (discrete) to IGD (integrated).
Fast Boot => deactivated
Boot Mode => UEFI
Intel Virtualization => deactivated
Intel VT-D => deactivated
CFG Lock => deactivated
BIOS Version is: E7B50IMS.140 from 26.2.2019
So after this all i inserted the USB-Stick and booted with clover from it.
Before the installtion i activated USB Ownership and USB Injection in the Clover options.
Then the installation stuck and i have this failure: AMFILoadTrustedKeysFromNVRam: no nvram variable
A photo of the failure is attached too.
I dont know what to do, to solve this.
If somebody knows how to solve this problem i would be very grateful if YOU help me.
Thanks!
Here are my components:
CPU: i9 9900K
GPU: AMD Vega 64
Mainboard: MSI Gaming Edge Z390M
RAM: HyperX 3200MHz DDR4 16GB one DIMM
Storage: Samsung NVME SSD Evo 860
The USB Stick is on a USB3.0 Port, i dont have an USB 2.0 Port.
Thanks in advance!
I can not upload my EFI folder...how can i do this?
Sorry for my bad english!
Greetings Mike.
