- Joined
- Apr 29, 2013
- Messages
- 63
- Motherboard
- Asus ProArt Z490 Creator 10G
- CPU
- i9-10900K
- Graphics
- RX 6950 XT
- Mac
- Mobile Phone
This is my 4th hack-build, using:
Install crashes / stops during white screen with Apple-logo using UniBeast.
In -v mode, it shows that installer stops after bluetooth message.
Also, it states that this is an unknown CPU model 0x3c
All advise is very welcome!
- Gigabyte GA-Z87-HD3
- i7 4790 3.6 GHz
- Asus GTX750Ti-PH-2GD5
- system drive: mSata SSD Kingston (SATA to mSATA adapter 6Gb/s)
- storage: 2 x WD Red 2TB
Install crashes / stops during white screen with Apple-logo using UniBeast.
- used-x, -v, GraphicsEnabler=Yes, PCIRootUID=0, NPCI=0x2000, maxmem=4096 in all sorts of combinations
- updated Bios to F7
- updated Bios to F8 (=beta)
- VT-d: disabled / XHCI Hand-off: enabled / EHCI Hand-off: enabled / XHCI Mode: enabled / XMP: Profile 1 / switched off Intel Internal Graphics
- Monitor connected to HDMI-port of video card. (also tried VGA-port)
In -v mode, it shows that installer stops after bluetooth message.
Also, it states that this is an unknown CPU model 0x3c
All advise is very welcome!