BrcmPatchRAM - Upload firmware into Broadcom Bluetooth USB devices

[yogia79]

04ca:200b is already in the kext.

Make sure you don't have other "bluetooth solutions" installed. They can conflict with BrcmPatchRAM.

I already removed BTFirmwareUploader from SLE before BRCMPatchRam applied. But none of them works. I have FakePCIID, FakePCIID_4400_4600, ACPIBacklight, VoodooHDA and VoodooPS2 kexts in Clover Kext. I install Yosemite 10.3 Vanilla.

No bluetooth shown in sys profiler.

Edit: I have repair permission and rebuild cache as usual.
I guess it's a USB problem but, i'm clueless..

 

[RehabMan]

I already removed BTFirmwareUploader from SLE before BRCMPatchRam applied. But none of them works. I have FakePCIID, FakePCIID_4400_4600, ACPIBacklight, VoodooHDA and VoodooPS2 kexts in Clover Kext. I install Yosemite 10.3 Vanilla.

No bluetooth shown in sys profiler.

Edit: I have repair permission and rebuild cache as usual.
I guess it's a USB problem but, i'm clueless..

Remove BTFirmwareUploader.kext. And any other solutions you have for bluetooth.

Check system.log. Check ioreg for BT device on USB bus.

Post ioreg: http://www.tonymacx86.com/audio/58368-guide-how-make-copy-ioreg.html. Please, use the IORegistryExplorer v2.1 attached to the post! DO NOT reply with an ioreg from any other version of IORegistryExplorer.app.

 

[yogia79]

Remove BTFirmwareUploader.kext. And any other solutions you have for bluetooth.

Check system.log. Check ioreg for BT device on USB bus.

Post ioreg: http://www.tonymacx86.com/audio/58368-guide-how-make-copy-ioreg.html. Please, use the IORegistryExplorer v2.1 attached to the post! DO NOT reply with an ioreg from any other version of IORegistryExplorer.app.

Hi Rehabman,

Attached is my ioreg using v2.1 after install BrcmPatchRAM (without any other bluetooth patch). I also attach clover plist in case can help. I don't use DSDT patch, just SSDT to patch Backlight control and Power Management.

I checked in IOReg, there is no bluetooth in USB EHCI .

Thanks.

 

[RehabMan]

Hi Rehabman,

Attached is my ioreg using v2.1 after install BrcmPatchRAM (without any other bluetooth patch). I also attach clover plist in case can help. I don't use DSDT patch, just SSDT to patch Backlight control and Power Management.

I checked in IOReg, there is no bluetooth in USB EHCI .

Thanks.

No bluetooth device on the USB bus... As such, neither BrcmPatchRAM or the native BT kexts can drive it.

If your bluetooth works on Windows, then you have a USB issue.

FYI: Power management is not implemented correctly.

 

[choory]

My bcm94352z(dell dw1560) bluetooth not working.I did install kext clover/kext/10.10/brcmpatchram.kext.

Not usb detect and not working bluetooth .

Can you tell me easy install bluetooth? I read first page.

Help me plz


kextstat | grep -i brcmp
23 0 0xffffff7f828d9000 0x7000 0x7000 com.no-one.BrcmPatchRAM (1.7.1) <22 5 4 3>

 

[RehabMan]

My bcm94352z(dell dw1560) bluetooth not working.I did install kext clover/kext/10.10/brcmpatchram.kext.

Not usb detect and not working bluetooth .

Can you tell me easy install bluetooth? I read first page.

Help me plz


kextstat | grep -i brcmp
23 0 0xffffff7f828d9000 0x7000 0x7000 com.no-one.BrcmPatchRAM (1.7.1) <22 5 4 3>

Post ioreg: http://www.tonymacx86.com/audio/58368-guide-how-make-copy-ioreg.html. Please, use the IORegistryExplorer v2.1 attached to the post! DO NOT reply with an ioreg from any other version of IORegistryExplorer.app.

 

[choory]

Post ioreg: http://www.tonymacx86.com/audio/58368-guide-how-make-copy-ioreg.html. Please, use the IORegistryExplorer v2.1 attached to the post! DO NOT reply with an ioreg from any other version of IORegistryExplorer.app.

Thank you.Here is my ioreg

 

[RehabMan]

Thank you.Here is my ioreg

No bluetooth device on the USB bus. Likely a USB problem, or BIOS disabling the BT, or something else.

Test your device on Windows.

 

[yogia79]

No bluetooth device on the USB bus... As such, neither BrcmPatchRAM or the native BT kexts can drive it.

If your bluetooth works on Windows, then you have a USB issue.

FYI: Power management is not implemented correctly.

Do you have suggestion how can i manage the USB issue?Also please tell me which part of power management that is not implemented correctly (if this is out of topic please PM me).

I use DSDT and SSDT from Linux, patched SSDT5 for Backlight then Drop OEM SSDT in Clover config. I leave vanilla SLE untouched except additional BTFirmwareUploader (removed) and BrcmPatchRAM.

I attached all files may be needed.

Thanks.

 

[choory]

No bluetooth device on the USB bus. Likely a USB problem, or BIOS disabling the BT, or something else.

Test your device on Windows.

Thank you.Can i need clover config.plist add kextpatch(for brcmpatchram.kext)?