- Joined
- Oct 23, 2013
- Messages
- 35
- Motherboard
- Asus Z170 Formula VIII
- CPU
- i7-6700K
- Graphics
- RX 5700 XT 50th AE
- Mac
Hello,
just finished my water-cooled Skylake build. I use the Asus Z170-WS and MSI GTX 970 4G. I installed 10.11.3 with Clover. I use iMac 17.1 SMBIOS.
I installed the web drivers, added GraphicsEnabler=No with Clover configurator, made sure all the other injectors are disabled, checked nvda_drv=1.
In UEFI the card is set as primary card (not auto). Onboard GPU is disabled.
After reboot the progress bar will reach 50% and then black screen. I only can boot again with nv_disable=1.
On 10.11.2 and my old machine (GB z87n wifi) there was no issue with this. Maybe it`s a Skylake issue?
Any ideas what`s missing?
just finished my water-cooled Skylake build. I use the Asus Z170-WS and MSI GTX 970 4G. I installed 10.11.3 with Clover. I use iMac 17.1 SMBIOS.
I installed the web drivers, added GraphicsEnabler=No with Clover configurator, made sure all the other injectors are disabled, checked nvda_drv=1.
In UEFI the card is set as primary card (not auto). Onboard GPU is disabled.
After reboot the progress bar will reach 50% and then black screen. I only can boot again with nv_disable=1.
On 10.11.2 and my old machine (GB z87n wifi) there was no issue with this. Maybe it`s a Skylake issue?
Any ideas what`s missing?