- Joined
- Oct 1, 2013
- Messages
- 46
- Motherboard
- Gigabyte Z490 Vision D
- CPU
- i7-10700K
- Graphics
- UHD 630
- Mac
- Mobile Phone
I am following Caseys Gigabyte Z490 vision D build and have run into a problem. I made the usb installer correctly I think but when I choose install mac os from opencore , I get the apple symbol and progress bar very slowly and then just goes to black screen. I am using IGPU. As I was following the Bios settings , there was one that was unavailable to me . See below.
Also- I started this build to replace my old build as I needed Thunderbolt going forward. I also wondered about the warning regarding Bios F5 and F6 being the only recommended - my Bios is F21. Will this affect Thunderbolt ?
Thanks in advance for the assistance
Will
Also- I started this build to replace my old build as I needed Thunderbolt going forward. I also wondered about the warning regarding Bios F5 and F6 being the only recommended - my Bios is F21. Will this affect Thunderbolt ?
Thanks in advance for the assistance
Will
- Settings → IOPorts
- Initial Display Output → PCIe 1 Slot (if GPU in slot 1) or IGFX (if using iGPU to display monitor) ( This one I did not see)
- Internal Graphics → Enabled (not Auto)
- Above 4G Decoding → Enabled