Contribute
Register

Black screen after booting into Mojave,KabyLake HD630

Status
Not open for further replies.
87zrjojo

87zrjojo

Joined
Aug 12, 2013
Messages
22
Motherboard
MSI GL62M 7REX-1650-Clover
CPU
i7-7700HQ/HM175
Graphics
GTX 1050 Ti + HD 630,1920x1680
Mac
  1. MacBook Pro
Mobile Phone
  1. Android
MSI　GL62M-7REX 1650
CPU: Intel Core i7-7700HQ(HM175), 3800 MHz
Memory: 8112 MB (DDR4 SDRAM)
Graphics: Intel(R) HD Graphics 630 (1 GB)

I am unable to boot into the system. I was able to install by using an brug AAPL,ig-platform-id 0x12345678. But Encountered a black screen issue during boot and never come up. I use config_HD615_620_630_640_650.plist to boot the system, I also tried to inject AAPL,ig-platform-id 0x00001b59, 0x00001659 with whatevergreen and change SMBIOS mbp14,1, mbp15,2, mbp13.1, etc.. there's no effect either. So what's the problem. Does anyone know?
 
87zrjojo said:
MSI　GL62M-7REX 1650
CPU: Intel Core i7-7700HQ(HM175), 3800 MHz
Memory: 8112 MB (DDR4 SDRAM)
Graphics: Intel(R) HD Graphics 630 (1 GB)

I am unable to boot into the system. I was able to install by using an brug AAPL,ig-platform-id 0x12345678. But Encountered a black screen issue during boot and never come up. I use config_HD615_620_630_640_650.plist to boot the system, I also tried to inject AAPL,ig-platform-id 0x00001b59, 0x00001659 with whatevergreen and change SMBIOS mbp14,1, mbp15,2, mbp13.1, etc.. there's no effect either. So what's the problem. Does anyone know?
Click to expand...
No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.
 

Attachments

  • debug_4912.zip
    3.4 MB · Views: 115
87zrjojo said:
Here's my problem reports with black screen. I get it with HDMI. Could you help me, thx.
Click to expand...

The EDID you're injecting looks like garbage:
Code: 
EDID version: 0.0
Manufacturer: APP Model a033 Serial Number 0
Analog display, Input voltage level: 0.7/0.3 V
Sync:
Maximum image size: 6 cm x 28 cm
Gamma: 1.01
Monochrome or grayscale display
Default (sRGB) color space is primary color space
Display x,y Chromaticity:
  Red:   0.0761, 0.4697
  Green: 0.9150, 0.6298
  Blue:  0.7695, 0.0371
  White: 0.0156, 0.0214
Established timings supported:
  640x480@72Hz 4:3 HorFreq: 37900 Hz Clock: 31.500 MHz
  800x600@60Hz 4:3 HorFreq: 37900 Hz Clock: 40.000 MHz
  1024x768@70Hz 4:3 HorFreq: 56500 Hz Clock: 75.000 MHz
  1280x1024@75Hz 5:4 HorFreq: 80000 Hz Clock: 135.000 MHz
Standard timings supported:
  312x312@75Hz 1:1
  264x264@67Hz 1:1
  504x378@76Hz 4:3
  920x920@60Hz 1:1
non-conformant standard timing (0 horiz)
  256x256@60Hz 1:1
  376x376@61Hz 1:1
non-conformant standard timing (0 horiz)
Detailed mode: Clock 0.010 MHz, 16 mm x 257 mm
                 16   32   33   17 hborder 0
                 16   16   17   17 vborder 18
               -hsync +vsync bipolar analog composite
               VertFreq: 34 Hz, HorFreq: 588 Hz
Detailed mode: Clock 21.020 MHz, 0 mm x 53 mm
               1802 1866 2381 1802 hborder 5
                  3    3    3 3972 vborder 140
               -hsync -vsync analog composite field sequential L/R
               VertFreq: 2 Hz, HorFreq: 11664 Hz
Floating point exception: 8

The EDID detected by Clover (in misc/preboot.log) is valid:
Code: 
15:895  0:000  --- Discovered EDID Table size:128
15:895  0:000  000  |  00  FF  FF  FF  FF  FF  FF  00  30  E4
15:895  0:000  010  |  33  05  00  00  00  00  00  1A  01  04
15:895  0:000  020  |  95  22  13  78  EA  A1  C5  94  59  57
15:895  0:000  030  |  8F  27  20  50  54  00  00  00  01  01
15:895  0:000  040  |  01  01  01  01  01  01  01  01  01  01
15:895  0:000  050  |  01  01  01  01  2E  36  80  A0  70  38
15:895  0:000  060  |  1F  40  30  20  35  00  58  C2  10  00
15:895  0:000  070  |  00  1A  00  00  00  00  00  00  00  00
15:895  0:000  080  |  00  00  00  00  00  00  00  00  00  00
15:895  0:000  090  |  00  00  00  FE  00  4C  47  20  44  69
15:895  0:000  100  |  73  70  6C  61  79  0A  20  20  00  00
15:895  0:000  110  |  00  FE  00  4C  50  31  35  36  57  46
15:895  0:000  120  |  36  2D  53  50  4B  33  00  BF

Code: 
EDID version: 1.4
Manufacturer: LGD Model 533 Serial Number 0
Made in year 2016
Digital display
6 bits per primary color channel
DisplayPort interface
Maximum image size: 34 cm x 19 cm
Gamma: 2.20
DPMS levels: Standby Suspend Off
Supported color formats: RGB 4:4:4, YCrCb 4:4:4
First detailed timing includes the native pixel format and preferred refresh rate
Display x,y Chromaticity:
  Red:   0.5800, 0.3496
  Green: 0.3398, 0.5595
  Blue:  0.1552, 0.1250
  White: 0.3134, 0.3291
Established timings supported:
Standard timings supported:
Detailed mode: Clock 138.700 MHz, 344 mm x 194 mm
               1920 1968 2000 2080 hborder 0
               1080 1083 1088 1111 vborder 0
               +hsync -vsync
               VertFreq: 60 Hz, HorFreq: 66682 Hz
Manufacturer-specified data, tag 0
ASCII string: LG Display
ASCII string: LP156WF6-SPK3
Checksum: 0xbf (valid)

Why are you injecting random garbage for EDID?
 
RehabMan said:
The EDID you're injecting looks like garbage:
Code: 
EDID version: 0.0
Manufacturer: APP Model a033 Serial Number 0
Analog display, Input voltage level: 0.7/0.3 V
Sync:
Maximum image size: 6 cm x 28 cm
Gamma: 1.01
Monochrome or grayscale display
Default (sRGB) color space is primary color space
Display x,y Chromaticity:
  Red:   0.0761, 0.4697
  Green: 0.9150, 0.6298
  Blue:  0.7695, 0.0371
  White: 0.0156, 0.0214
Established timings supported:
  640x480@72Hz 4:3 HorFreq: 37900 Hz Clock: 31.500 MHz
  800x600@60Hz 4:3 HorFreq: 37900 Hz Clock: 40.000 MHz
  1024x768@70Hz 4:3 HorFreq: 56500 Hz Clock: 75.000 MHz
  1280x1024@75Hz 5:4 HorFreq: 80000 Hz Clock: 135.000 MHz
Standard timings supported:
  312x312@75Hz 1:1
  264x264@67Hz 1:1
  504x378@76Hz 4:3
  920x920@60Hz 1:1
non-conformant standard timing (0 horiz)
  256x256@60Hz 1:1
  376x376@61Hz 1:1
non-conformant standard timing (0 horiz)
Detailed mode: Clock 0.010 MHz, 16 mm x 257 mm
                 16   32   33   17 hborder 0
                 16   16   17   17 vborder 18
               -hsync +vsync bipolar analog composite
               VertFreq: 34 Hz, HorFreq: 588 Hz
Detailed mode: Clock 21.020 MHz, 0 mm x 53 mm
               1802 1866 2381 1802 hborder 5
                  3    3    3 3972 vborder 140
               -hsync -vsync analog composite field sequential L/R
               VertFreq: 2 Hz, HorFreq: 11664 Hz
Floating point exception: 8

The EDID detected by Clover (in misc/preboot.log) is valid:
Code: 
15:895  0:000  --- Discovered EDID Table size:128
15:895  0:000  000  |  00  FF  FF  FF  FF  FF  FF  00  30  E4
15:895  0:000  010  |  33  05  00  00  00  00  00  1A  01  04
15:895  0:000  020  |  95  22  13  78  EA  A1  C5  94  59  57
15:895  0:000  030  |  8F  27  20  50  54  00  00  00  01  01
15:895  0:000  040  |  01  01  01  01  01  01  01  01  01  01
15:895  0:000  050  |  01  01  01  01  2E  36  80  A0  70  38
15:895  0:000  060  |  1F  40  30  20  35  00  58  C2  10  00
15:895  0:000  070  |  00  1A  00  00  00  00  00  00  00  00
15:895  0:000  080  |  00  00  00  00  00  00  00  00  00  00
15:895  0:000  090  |  00  00  00  FE  00  4C  47  20  44  69
15:895  0:000  100  |  73  70  6C  61  79  0A  20  20  00  00
15:895  0:000  110  |  00  FE  00  4C  50  31  35  36  57  46
15:895  0:000  120  |  36  2D  53  50  4B  33  00  BF

Code: 
EDID version: 1.4
Manufacturer: LGD Model 533 Serial Number 0
Made in year 2016
Digital display
6 bits per primary color channel
DisplayPort interface
Maximum image size: 34 cm x 19 cm
Gamma: 2.20
DPMS levels: Standby Suspend Off
Supported color formats: RGB 4:4:4, YCrCb 4:4:4
First detailed timing includes the native pixel format and preferred refresh rate
Display x,y Chromaticity:
  Red:   0.5800, 0.3496
  Green: 0.3398, 0.5595
  Blue:  0.1552, 0.1250
  White: 0.3134, 0.3291
Established timings supported:
Standard timings supported:
Detailed mode: Clock 138.700 MHz, 344 mm x 194 mm
               1920 1968 2000 2080 hborder 0
               1080 1083 1088 1111 vborder 0
               +hsync -vsync
               VertFreq: 60 Hz, HorFreq: 66682 Hz
Manufacturer-specified data, tag 0
ASCII string: LG Display
ASCII string: LP156WF6-SPK3
Checksum: 0xbf (valid)

Why are you injecting random garbage for EDID?
Click to expand...

thanks for your reply!
I injected the fake EDID because of testing if it could solve the black screen issue. no matter wether I inject the EDID or not, I got black screen either. So what's the reason of this problem?
 
87zrjojo said:
thanks for your reply!
I injected the fake EDID because of testing if it could solve the black screen issue. no matter wether I inject the EDID or not, I got black screen either. So what's the reason of this problem?
Click to expand...

Injecting garbage as EDID is a way to guarantee failure.

You can inject Clover detected EDID with an empty EDID in Devices/Properties/PciRoot(0)/Pci(0x02,0) and just config.plist/Devices/Graphics/EDID/Inject=true.
 
Hey, I used you files it worked fine but the screen is small tho. do you know how to fix this?
 
Marwin987 said:
Hey, I used you files it worked fine but the screen is small tho. do you know how to fix this?
Click to expand...
remove EDID related patches and use HDPI, maybe you could get it better
 
87zrjojo said:
remove EDID related patches and use HDPI, maybe you could get it better
Click to expand...
I assume the issue is related to Nvidia driver. I have os Mojave installed and latest nvidia driver doesn’t support Mojave
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top